The AUSubaru.com.au Forums

Hello, could you find out how much will be shipping in the Russian city of Sochi? Thank you. Dude, these doors weight like 40kgs each, it would cost a fortune to send them to Russia. I would suggest looking for parts closer to home. I could get you a quote, but I'm not sure where to even try to get...

RSR 555 wrote:Can I buy this tail light and both targa top glass panels?

Would you be able to pack them safely for transport to WA?

I'm sure I could manage that. PM me your details so I can work out a shipping price.

Misc trim parts - Make an offer

Tailgate. Minor rust in bottom edge, some dents (marks are tape adhesive). Don't seem to have missing cover anymore - $50 http://imageshack.us/a/img842/7029/yrl8.th.jpg http://imageshack.us/a/img812/7940/6f38.th.jpg http://imageshack.us/a/img24/6960/0yok.th.jpg http://imageshack.us/a/img14/2460/18nk...

Gents, I have the following parts from my brumby part out still available. Parts are in Tieri QLD (Middle of no where), but drop off is available to Townsville, Charters Towers, Mackay, Rockhampton and Emerald. Message me on here or SMS to 0402137324 (Craig) Front Guards: Drivers Side (White) is in ...

Sorry guys, didn't realise I didn't have email notifications turned on and don't get on here too often. Situation rectified now.

Have PM'd everyone.

Will see how we go mate, got a couple of people interested in some of the parts, but nothing sold as yet.

Ok guys, I am taking this brumby body to the tip in the next week or two. If anybody wants any parts off it, make me an offer. Not looking for heaps of cash, just enough to make it worth my while removing them and organising freight or transport. As per the comments above, could probably arrange dro...

Now parting out here showthread.php?t=23540

Folks, i've decided to part out my Brumby WRX project that i've been working on here http://ausubaru.com.au/showthread.php?t=8376 Everything is up for grabs, including: -5 stud conversion kit to suit brumby or MY subaru - $800 - Sold Pending payment -Front adjustable HSD coilovers - $300 -Front '96 ...

It's been a while since I've spoken to him, but I was consulting with Linsay Stone (Automotive Engineer who issues blue plates) in Townsville during the work, and he was fine with what I was doing. In saying that I would be happy to extensively photograph the mods for a prospective buyer and they ca...

Name of Item: QLD Personalised plates 500OBY Condition: Used Location: Tieri, QLD Price: $500ono Contact details: 0402137324 Read the rules: Yes Personal Sale: Yes Pictures: Included with Member name and Date QLD Personalised plates 500OBY New colours can be ordered through PPQ once you own them Per...

Item: Unfinished Brumby WRX Project Car (with Funtop) Description: WRX Brumby Project Car for Sale. Probably 50-60% finished, comes with everything needed to finish including: -WRX half cut and Liberty Turbo RS rear Diff and brakes -STi Seats -Full 4 wheel disc brake conversion -Front Adjustable Coi...

Folks, my lack of free time and motivation has got the better of me. This is officially on the market now. Probably 50-60% finished, comes with everything needed to finish including: -WRX half cut and Liberty Turbo RS rear Diff and brakes -STi Seats -Full 4 wheel disc brake conversion -Front Adjusta...

Lol, it's been a while since i've posted here. Since then i've moved to a Coal mining town near emerald call Tieri, at the end of 2010, and finally moved the brumby down with me in August this year. Since then i've done a bit on it, but not a huge amount. Have almost finished the seat mounts. I'm ba...

Hi Folks, been ages since I posted on here. A lot has happened since my last post, mainly in regards to my personal life, but also on the brumby. Long story short, i've accepted a job that's approx 6hrs drive from Townsville and will be moving at the end of the month. At this stage it's going to be ...

I was refering to the thread size and did mean an M12 (i.e 14mm socket), an M8 or M10 would be too small in my opinion.

I'd use at least what the factory mounts use, which I think is at least M12. That should also be fine for the outside rear. For the inside rear, if like me you are using the factory WRX seat belt buckle attached to the seat rail, I would at least use an M16, maybe M20 and heavily reinforce the trans...

Hey Rohan, I saw your post in my thread, but haven't got round to posting some pics and an explaination up. Looks like you're going great guns and the brumby's last owner looks like he stashed all of his mig wire in the seat rails before selling it on :p. I initially did my front mounts like you did...

I've lost my welder for a while (I borrowed it from someone) so progress updates will be delayed for a while. Brumbyrunner - For the dashpad, I actually peeled the black cover off the sections of the dash that I had to cut off, so that when I fit it in place and add some new sections to it, I can re...