The AUSubaru.com.au Forums

Hi all building another engine. Whilst the block and cam etc were off getting machined some genius decided to play silly buggers with me and hide a few parts. Now I've got the rest back I've managed to rummage together everything I need except for the big end cap and nuts off one connecting rod. If ...

What sizes are everyones signature pic's?

I'm back. Hopefully the cogs are turning so to speak, The cam has been sent off to be reground I have the heads back the block is off getting bored out. The sticking point was it needed to go oversize so was cringing at the cost considering i have an EJ25 there for a conversion but decided i don't h...

I haven't done that much work on the EA82 although I have dabbled a little. and done enough on the old EA81's in saying that i'm in the process of rebuilding one now. But when i'm home I am in canberra so if you get stuck look me up and i'll see if i can't call around.

I thought the left and right door handle surrounds were interchangeable I am almost certain on my old brumby I swapped them over so the crusty side was on the bottom crisis averted!

Is there really an EA 81 motor or both EA82s? I'm not that far away and shouldn't be interested in any more than your L alternator but because I know exactly where numeralla is and its less than 100k's away i'm keen in the EA 81 motor and L series box (if dual range. P.S. maybe able to drop parts of...

Subtle "BUMP" in the night.

http://www.ebay.com.au/itm/05-damaged-s ... 500wt_1413

A link to part of my collection to be cleared away......
Check it out and tell me if i'm doing something wrong or if your interested.

http://www.ebay.com.au/itm/05-damaged-s ... 500wt_1413

If you were down near Canberra I'd even have the parts to turn it back to stock. I'd almost be able to borrow a hoist for the changeover.

Apple sell an iphone5/new ipod converter for $30 but you should be able to get them on Ebay by now, Handy for my new phone in the brumby and it can control and charge my iphone 5. keen to know how you go in the outback though as i'm shopping for one now!

No Response No interest No gearbox.

I've got a 3inch one in a brumby but it needs a shaft for the steering column.
BUT... How much are you prepared to pay, The best option is contact cr0ss**** performance as mentioned and get a new quality 50mm kit for "Cheap".

Anyone got any second hand ones for a bush basher that they could send to canberra.

Im just not so keen on spending nearly a hundred bucks on an engine in unknown condition especially when the car itself only cost me that!

Donkey tits, The front bar has been chewed up in the centre but matt from mitchell should be able to do you a good deal, From memory the front quater panels are both good as was the bonnnet headlights and indicators should all still be good I can cut off the radiator support and you can drill out th...

If only it was the six cylinder then I would have snapped it up for sure!
Hope all goes well for a painless sale though!

Hey did that Brumby at dapto with the caved in passenger door still have the floor Matt's?

It's still together but it is a wreck, I was going to use some parts for an 05 outback.

Well it's a pity it's not winter yet. But their always well sought after in jindabyne etc, dirt cheap to run and you don't need to fit chains when working on the slopes.

An auto oil cooler (Included in the tow pack) is the go plus tyres @ 8psi with a compressor for when you get on the hard stuff. but the best thing as has been said is a companion vehicle even if you need to tow them out yourself. But a good tip is don't use the brakes just coast to a stop.

Actually I have an L although would prefer it wen't whole- $100 as is where is.
I forgot an 01 imprezza bug eye 2.5 manual no drivetrain.
MY not sure on quality of the DUAL range gearbox.
Sorry early liberty air con compressor went to fitting air con into my old wagon!