The ***ALL NEW*** AUSubaru.com.au Forums

http://s295.photobucket.com/albums/mm135/esray71/
here's some pics of the import engine with the hole from the head and pipe that goes to inlet and suction pipe that is on the opposite side of the motor.

i'll have some pics soon, it's definately a jap import going by the stamp fitted to the motor. It's a buggar that the air suction pipe is on the wrong side of the motor although i'm sure i can get by without it, definately differences with emission stuff on air cleaner and slightly different carb. I...

is it a carby motor?

ZefleR wrote:I just got a Valve Regrind Kit by Permaseal from AutoOne for about $158 and it was a nice set. It didnt have the EGR gasket tho.

Regards,
Gary

great, thanks for the info! any idea how much to have heads reco'd?

Where can i get good quality head gasket kit? i know that subaru will have but i'm sure very expensive as i've got prices for other things b4 and saved a lot buying elsewhere. Not sure about places like supercheap and repco, whats the quality like? Aslo whats the price to have heads tested, also pri...

I have an imported EA82 i was thinking about puting into my 93 wagon but realised there is something a little bit different. One thing is the (dunno the name of the thingy) the pipe that comes out from exhaust, as the manual descibes, air suction pipe, air goes from intake to exhaust gases leaving e...

No run on since the solenoid has been installed. Mine is a 32/36 DGEV. The primary idle jet is physically bigger than the secondary idle jet. The solenoid screws straight in replacing the brass idle jet holder. Wish i'd got a manual choke though as the carbi needs to be spaced up so it fits over th...

speaking of weber and chokes. I have an old man choke jobby never fitted but looking at it recently indicates the last owner woulda swallowed a lotta dust. What prevents dirt getting up the hole the choke arm passes through ? Just a gasket or rubber boot ? the choke arm on mine passes through a nic...

Good idea to start this up Cynical!....does anyone know where to get a heater core for L series wagon? east to south eastern suburbs prefered.

I also had trouble with engine run on when i tried my webber, have you tried the solenoid yet and does it work well? this link might help with jet size and tuning? Just scroll down to end of page. Good luck!


http://www.ausubaru.com/wiki/index.php? ... tor_Plates

thanks for the info, just to get it going for this week i just connected all of the small water hoses, seems to be no pressure building up and leaking at any join at the moment. Next weekend i'll put the other manifold on and try your suggestions. Also have some tuning of the carb to do, took it for...

G'day, just wondering if anyone might have some advice on the weber EA82coversion? i have fitted the weber and blocked off some vac hoses but having problems with coolant leaking. The small hose that goes to the bottom of the (original carb) I have blocked off because i'm thinking i don't want that ...

midlifecrisis wrote:Hi

I am using the fuel pump of a L series on my EA81 with a Webber, Have been doing so for nearly 2 years on and off road use with no problems.


Hope this helps

Marc

Do you know if the fuel pumps are the same for the ea81 and ea82? Thanks for all the advice guys!

Um.... WOW:???:

no worries, thanks!

huh...that had me thinking, where the bloody hell is it??, glad you found it so now i know where it is too!

Mate, enjoy the trip and show us the pics when you get back!

Just wondering if anyone knows if the standard fuel pump for the EA82 carby will be ok with a weber carby?

just got back from burson auto... inlet $7.60 and spigot bearing $3.50 but they have no exhaust gaskets, told them the price of genuine parts (exhaust gaskets) and they reakon maybe they should selling them, at half the price of genuine they would make heaps!

i went to supercheap for a hose already had a bend in it, i just cut it to the length needed. It's been 6 weeks and bloody cold in the morning!!!