Can anyone help me to get a part number for a 08/1996 EJ20R engine head gasket, or even better, a breakdown of engine part numbers in general. I blew the gasket at a hill climb over the weekend and need to replace it fast before the next race. Thanks much.
Steve
Search found 10 matches
- Mon Jun 27, 2011 11:32 pm
- Forum: Engine, Gearbox and Diff
- Topic: EJ20R Head Gasket Part Number?
- Replies: 0
- Views: 1638
- Tue Sep 15, 2009 9:18 pm
- Forum: Trouble Shooting
- Topic: Boost or No Boost Help Needed
- Replies: 7
- Views: 2405
OK, Back at it last night. Re-checked many of the hoses, cleaned all solenoids and checked them for operation, traced all lines to components and they were where they should be. I think solenoid box is OK now. Took off MAP sensor hose, replaced sensor with gage and only getting about 5 PSI with litt...
- Fri Sep 04, 2009 9:49 am
- Forum: Trouble Shooting
- Topic: Boost or No Boost Help Needed
- Replies: 7
- Views: 2405
Just checked fuel pressure. It sits at 46 PSI with engine off. Starting up, it runs at 38 PSI at idle. At High RPM, it runs up as high as 50 PSI. Under mild boost, about 46 PSI. When it is acting up, it never drops under 44 PSI. Those numbers are right to what the liberty manual says they should be....
- Fri Sep 04, 2009 8:45 am
- Forum: Trouble Shooting
- Topic: Boost or No Boost Help Needed
- Replies: 7
- Views: 2405
Here is an update. I checked the boost gage location, and it was for the vacuum booster, but there was no valve and it was open to the intake. After further applying thottle and brake, I was able to get it to read as much as 8 lbs boost. Guess I wasn't loading it hard enough. That still leaves my ma...
- Thu Sep 03, 2009 9:13 pm
- Forum: Trouble Shooting
- Topic: Boost or No Boost Help Needed
- Replies: 7
- Views: 2405
It is possible that you aren't getting a correct reading but you should still be getting some sort of boost reading there. The closer you can get your boost guage to the throttle body the more acurate the reading. You should have 3 small hoses runnning off the front of the manifold just behind the ...
- Thu Sep 03, 2009 10:37 am
- Forum: Trouble Shooting
- Topic: Boost or No Boost Help Needed
- Replies: 7
- Views: 2405
Boost or No Boost Help Needed
I posted this in a few places and am hoping those who browse only certain area see it. I have an EJ20R from a 1996 Legacy GTB in a race car. I have run many events and have been working the bugs out of it. I got to an event where I could really open it up, and started having some bogging issues. I h...
- Thu Jul 16, 2009 8:26 am
- Forum: Conversions, Modifications and Performance Upgrades
- Topic: What to do with an EJ20R - Subaru juSTI
- Replies: 6
- Views: 2499
- Mon Jul 13, 2009 9:43 am
- Forum: Conversions, Modifications and Performance Upgrades
- Topic: What to do with an EJ20R - Subaru juSTI
- Replies: 6
- Views: 2499
- Thu Jul 02, 2009 9:13 pm
- Forum: Conversions, Modifications and Performance Upgrades
- Topic: What to do with an EJ20R - Subaru juSTI
- Replies: 6
- Views: 2499
- Mon Mar 17, 2008 9:32 pm
- Forum: Electrical, Wiring and Lighting
- Topic: Starter Differences?
- Replies: 3
- Views: 1267
Starter Differences?
I was wondering if someone can help here. I have a JDM EJ20R motor and have it mated to a 1994 Legacy FWD transmission. Just tried cranking it over tonight, and the starter is quite a ways away from the ring gear. The starter I am using as well as the flywheel are from JDM car. Would anyone know if ...