Search found 1693 matches

by tim_81coupe
Thu Oct 20, 2005 8:04 pm
Forum: Conversions, Modifications and Performance Upgrades
Topic: EJ18 -> MY Tourer cont. More Q's
Replies: 35
Views: 7903

I'd be replacing the entire clutch as a kit, including pressure plate, clutch plate and thrust bearing. No reason at all to go genuine, any well known aftermarket brand should do just fine. $480 is an absolute rip, I got my pull type turbo Exedy kit for less than $370! Surely a non turbo clutch kit ...
by tim_81coupe
Thu Oct 20, 2005 2:40 pm
Forum: Videos
Topic: THE NEW GTR PROTO
Replies: 17
Views: 5767

LTurbo - ok, I didn't know that! That would turn me off Datto's for life!

4Muff - I agree with you 100% The R33 and R34's will always be the pinnacle of Skylines, regardless of what they release from now on.
by tim_81coupe
Thu Oct 20, 2005 2:38 pm
Forum: Western Australia
Topic: When's the next meet guys?
Replies: 72
Views: 11807

Thanks for the delay Mattims. *Should* be ready by then.

I wouldn't mind giving the 4MUFF WRX a run, I seem to remember there was some significant work done to it? I kinda want to be beaten on my first run so the Leone doesn't stand out so much...
by tim_81coupe
Thu Oct 20, 2005 2:35 pm
Forum: Trouble Shooting
Topic: l series front top shocky mount
Replies: 9
Views: 2476

You can buy them new online.

http://www.maximumautoparts.com/SU_Stru ... items.html

I only know this because I own an MY, unfortunately this mob don't do an MY top! :?
by tim_81coupe
Thu Oct 20, 2005 2:32 pm
Forum: Subaru Chat
Topic: Dual cab brumby
Replies: 19
Views: 5081

I think they called it a fairy - ie figment of the imagination.

I've seen 4 photos all up, 4 different Brat's. One was an obvious photochop, the others were done better. I seem to remember a post on the old board or USMB maybe with someone proving they were fictional.
by tim_81coupe
Thu Oct 20, 2005 2:30 pm
Forum: Western Australia
Topic: WA Sticker Info
Replies: 36
Views: 6574

Jaffa wrote:Tim = will cost you :P only kidding = done.
Does this mean they won't cost me? :P :P

I'll have to catch up with you soon, shouldn't be hard seeing as you've only got an EA82t. :lol:
by tim_81coupe
Thu Oct 20, 2005 2:28 pm
Forum: Trouble Shooting
Topic: no power
Replies: 15
Views: 4147

LOL. Cheers, glad it made sense.
by tim_81coupe
Thu Oct 20, 2005 9:25 am
Forum: Trouble Shooting
Topic: no power
Replies: 15
Views: 4147

MAF - Mass Air Flow. Basically this sensor counts the volume of air entering the engine, and from this the ECU calculates engine load and thus adjusts the amount of fuel accordingly. The 02 sensor is the telltale on this, basically lets the ECU know how much fuel was actually burnt. BAC - Bypass air...
by tim_81coupe
Wed Oct 19, 2005 11:34 pm
Forum: Subaru Chat
Topic: Dual cab brumby
Replies: 19
Views: 5081

I'm pretty sure that's a photochop Aspro.

Brumby Crewman eh? Considering the size of a rear seat in an MY (or an L for that matter) I'd be wondering why you'd bother.
by tim_81coupe
Wed Oct 19, 2005 10:06 pm
Forum: Videos
Topic: THE NEW GTR PROTO
Replies: 17
Views: 5767

I think it's great, I am very happy they kept the 4 circle lights at the rear. better than the 350z. They have to if they want to call it a Skyline. The four lights are synonymous with the name. Well except for the R31 wagons that is... I think it looks like a bad rip on the Z. That's 180 degrees f...
by tim_81coupe
Wed Oct 19, 2005 10:00 pm
Forum: Conversions, Modifications and Performance Upgrades
Topic: EJ18 -> MY Tourer cont. More Q's
Replies: 35
Views: 7903

Well Subamike is the one to talk to then, his MY runs an EJ18 SPFI.

AFAIK he runs the 070 bosch pump, WITHOUT a surge tank!
by tim_81coupe
Wed Oct 19, 2005 9:54 pm
Forum: Engine, Gearbox and Diff
Topic: Lifter Ticking Noise
Replies: 9
Views: 2411

I used the Nulon Lifter free stuff, we sell it at my work. It's crap and I won't sell it to anyone after using it.

Super X all the way.
by tim_81coupe
Wed Oct 19, 2005 9:53 pm
Forum: Trouble Shooting
Topic: no power
Replies: 15
Views: 4147

idle is meant to be controlled by the ECU... so it being higher now is a little odd. Dave You can adjust the idle via the idle screw on the side of the throttle body (touches the throttle linkage). Subaru did this when my mum asked for the idle to be turned up slightly on the Forester. The screw al...
by tim_81coupe
Wed Oct 19, 2005 2:24 pm
Forum: Conversions, Modifications and Performance Upgrades
Topic: Brumby plus ej20t
Replies: 23
Views: 7803

As well as you could expect a low compression 2l to run...

I'll help with an EJ20T swap...


Actually I'll help with anything if I'm bored :D
by tim_81coupe
Wed Oct 19, 2005 2:19 pm
Forum: Western Australia
Topic: WA Sticker Info
Replies: 36
Views: 6574

As per phone call, I'll be up for 2.
by tim_81coupe
Wed Oct 19, 2005 1:18 am
Forum: Conversions, Modifications and Performance Upgrades
Topic: EJ18 -> MY Tourer cont. More Q's
Replies: 35
Views: 7903

Oh, and AFAIK EJ alternators differ slightly model to model, my EJ20G alternator has 4 wires as opposed to EJ22 ones which have 3 wires. At a guess I'd say the EJ18 would have a three wire as well, but you'd prolly be able to wire in whichever you find. As for the mounting brackets, I'm really not s...
by tim_81coupe
Wed Oct 19, 2005 12:06 am
Forum: Conversions, Modifications and Performance Upgrades
Topic: EJ18 -> MY Tourer cont. More Q's
Replies: 35
Views: 7903

Im not aware of any ea81 model car having a return line. Not in Australia Dave, but our friends across the Pacific had them in their "Turbo Traction" models. The stock VL pump as fitted to them off the production line was apparently a really noisy unit. The Bosch one can be noisy too, but only if i...
by tim_81coupe
Tue Oct 18, 2005 11:59 pm
Forum: Subaru Chat
Topic: The Plan for my vortex
Replies: 26
Views: 5437

LOL! Sorry, I'll side with smoov on this one. Only BMW I've ever driven was a 2002 320i - and to date it's the most refined car I've ever driven. Not bad considering it was the pov-pack. As for the extractor issue, its not pointless on a boxer engine. It's pointless on a siamese-port engine with hea...
by tim_81coupe
Tue Oct 18, 2005 11:49 pm
Forum: Western Australia
Topic: When's the next meet guys?
Replies: 72
Views: 11807

I don't need to steal one, so I'll let you guys sort that out.

Maybe I should give them another run. When I went on a cruise with those guys last year I was surprised that I had nearly the slowest car there.. only car slower was a GX-RS swap that was otherwise factory...
by tim_81coupe
Tue Oct 18, 2005 10:32 pm
Forum: Western Australia
Topic: When's the next meet guys?
Replies: 72
Views: 11807

Maybe we should gatecrash the RS meet...

Go to advanced search