The AUSubaru.com.au Forums

should also add, 92 model, 135k on the clock, sony cd head unit, 2 jbl 8 inch subs, sony coaxal 6 1/2 inch door speakers, 2 amps, CVs only new 2 years ago, 3 tires at about 90 % spare at 80% and one flat that while be replaced with new (all goodyears except spare which is dunlop). a spot of rust on ...

Hi guys.. Im looking to sell the brumby, so Im looking for offers. it has a few dings and scratches, 2.5 inch sports exhaust from drop pipes back with a high flow muffler and stainless tip, new front bearings both sides, new radiator, water pump and thermostat, a new triton thermoswitch, and new fro...

hi guys, just wondering how hard it is to source front wheel hubs for brumbies. will any hub form older 4wd subies fit? there is the possibility that mine might be shot so i thought Id try and source one now, having the front pass bearing replaced soon as it IS shot and was going to have the mech ha...

yeah I have no doubts about iut being an ea81, thought there might have been other differences between the two aswell though.. thanks for clearing that up, Ill get onto super cheap asap then. Thanks guys

howdy, i'm in need of a top radiator hose for my 92brumby. anyone got one nearish sydney? also, im really confused about whether my brumby is a my or an l series?how do you find this out and how much difference is there between the two?

hmm... considering the CV joints are only a a couple of years old, I'm holding out hope that its just a bearing... Do you reckon it would be worth while just replacing the hub and bearing straight off? thanks for the detailed response, I really value this site its given me alot of information thats ...

bump

Hi all, new Brumby issue for you all to diagnose.. Im getting alot of grinding noise from the front passenger side hub. I thought it was worn brake pads but upon pulling apart the brakes and replacing only half worn pads with new ones, the noise is still present. Had a mechanic have a look and he sa...

bloody oath, I've been through hell trying to find a replacement.. got in the end, but it just sucked.

ah yes, that makes sense. ta

thanks guys, sorted it with a pair of long nose pliers. quick follow up question, are the front disc cylinders self adjusting?

Nah I get it. Its Ironic, cause I went to the oinly plaace open, the servo, looking for a c clamp and he said that he had the same thing on his car, cant remember what it was, not subie. Interesting coincidence... Awesome though, thanks for the tip, change em tomorrow. Ta

Just need a quick tip, how do you compress the cylinder when changing the brake pads on a brumbyu, got new bendix pads and am trying to fit them with no luck, the cylinder doesnt seem to want to depress enough to fit the new pads... what am I doling wrong?

mate where'd ya source your clutch cable? need one for my 92 brumby! went snap this arvo, ****ing frustrating feeling that!

well, its back in the car and, after replacing the dud battery, the brumby is back in the saddle. Thanks again for all your help guys.

So got the welds done today, gonna put it back in tomorrow and hopefully it'll hold up for a while till I can get a newie.

yeah fair enough, I definitely want to replace it, but I need to have it mobile for the move, just to get it to the new place atleast. Thanks again for the help guys, you've been indispensable. Hopefully I'll have th little beast going again by mid week.

so no chance of a resurrection? a bit of welding, a little bash a nd a bit of flat bar wont hold it together for a bit? need to have it mobile soonish as I'm moving and its just parked on the street at the mo.

bugger.. no hope of a resurrection you dont think? Need to atleast get it semi mobile soonish as I'm moving soon and its currently just parked on the street. you think a quick weld, a little bash and a bit o flat bar would hold it in place for a bit?

hi guys, thanks again for all your help, I have managed to pull the offending item out of the car, not an easy job, and now just need to get it fixed. I've attached some photos to show the faults so you guys can give me your opinions. http://ausubaru.com.au/attachment.php?attachmentid=2039&stc=1&d=1...