The ***ALL NEW*** AUSubaru.com.au Forums

hey guys i have a complete '90 ej22 that i removed from a liberty wagon. i pulled the complete loom and ecu and all associated wiring from the front seats forward. everything needed for a conversion i was going to put it into a MY wagon but plans have changed. motor ran well when it was in the car. ...

hey guys i had a look thru most of the posts about whats needed for the conversion in a my or lseries and im unsure if i need to pull the fuse box thats in the engine bay and all its wiring aswell? i pulled out everything under the dash seats etc. do i need that aswell ?
cheers brenton

hey guys i have a brand new tyre on a spare rim i no longer need, brand new 185/70r14 on a liberty rim. ive also got a set of 4 tyres on the car atm that are in good shape, but i need them to roll the car around i could do some sort of swap if someone needs them. cheers brenton Item....................

hey guys i have a liberty wagon im scrapping, did anyone need any parts like bits of trim or anything before i get rid of it? just ask if need anything drive shafts etc Item...............................4wd liberty wagon gen 1 Description...................... scrapping, everything Condition..........

hey mate great work , thanks for all your effort

hey guys i have a set of MY rear axles with great joints and boots. and my l series ones are completely shot. is it possible to swap the joints onto the L series axles so they are the right length ?
cheers brenton

so wouldnt the cv's still be the weakest link in the driveshafts even if the axle was thinner ? or is the axle so thin i might break them 4wding ?
cheers brenton

hey guys are the front driveshafts in the l series the same between 2wd and 4wds ?
cheers brenton

yeah no probs www. youtube .com/watch?v=pFwG-0CyTwU

cheers brenton

yeah , it was nice and wet

hey guys did some donuts the other day
http://www.youtube.com/watch?v=pFwG-0CyTwU

hey mate the car looks great ,
cheers brenton

yeah i didnt put the motor in for more power , i wanted to be able to adjust the tappets and have a bulletproof motor for off roading (less things that can break) . the motor has enough power to drive my 28" tyres atm. its just a much easier motor allround to work on. i changed the dist. to a electr...

hey guys a sure track from a sti , its for the front diff , at 400 , the person has listed it up with subaru spelt wrong so u might get a bargin if anyone can use it http://cgi.ebay.com.au/Suabru-05-Spec-C-STi-6-Speed-Suretrac-Front-LSD_W0QQitemZ320411054967QQcmdZViewItemQQptZAU_Car_Parts_Accessorie...

hey guys i found out why my ea81 swap was running out of petrol, i was taking the power for the pump from the carby and coil switched power, it must have been dropping to below 12v's and stopping the pump from running and draining power from the coil. lol woops got it hooked up to a new switched pow...

hey guys its a long story but i have put a ea81 into my '92 Lseries 4wd, i changed the distributor for a electric (2wd Lseries dist) instead of the points ea81 dist. i was going to use the 4wd Lseries dist but i couldn't remove the pin in the drive shaft to change the lower drive so i used the 2wd o...

yeah ill take some pics 2morro , cheers brenton

hey guys i got my ea81 motor running in my Lseries , it was pretty easy i managed to run my larger l series flywheel and clutch over the smaller ea81 setup. with a little bit of filing on the bottom section of the motor. (the smaller ea81 clutch disc wont mate to the larger spline of the L 5speed, i...

cool let us know who it goes, cheers brenton

i thought i heard that you cant really plug read any more due to the leadless petrols and the old tricks only worked on cars running leaded petrol to get a proper reading of them?
cheers brenton