Search found 10 matches
- Tue May 13, 2008 4:06 pm
- Forum: Subaru Chat
- Topic: Suspension set up
- Replies: 5
- Views: 2307
RX Suspension
S&D RX Turbo, Depending on your budget best strut/shock option is KYB if you don,t mind spending close to $200 a corner. Cheap option is reconditioned stock struts with stiffer valving any good suspension place should handle that. Thicker front sway bar, Whiteline I think make one for L series, rear...
- Fri Aug 03, 2007 4:19 pm
- Forum: Trouble Shooting
- Topic: Rx Clutch Issues
- Replies: 6
- Views: 1907
Rx Clutch
Tristan,
Lever is bacsically same as MY, think we have gone past the adjustment stage as a fix now. I,m in Brissy long way from you .
majordad
Lever is bacsically same as MY, think we have gone past the adjustment stage as a fix now. I,m in Brissy long way from you .
majordad
- Wed Aug 01, 2007 9:17 pm
- Forum: Trouble Shooting
- Topic: Rx Clutch Issues
- Replies: 6
- Views: 1907
Rx Clutch Issues
Having problems with the RX clutch. Have adjusted every which way and very difficult to engage any gear while stationary and bloody hard on the go. It is fitted with Direct Clutch service Double Diaphram job which has been brilliant given the torque it has taken. My theory is a bent release lever As...
- Fri Oct 13, 2006 4:18 pm
- Forum: Subaru Chat
- Topic: rust around windscreen
- Replies: 10
- Views: 3259
Windscreen
Timmo,
Had a new screen fitted and was not home when he did it no idea what sealer they used.
majordad
Had a new screen fitted and was not home when he did it no idea what sealer they used.
majordad
- Wed Oct 11, 2006 4:22 pm
- Forum: Subaru Chat
- Topic: rust around windscreen
- Replies: 10
- Views: 3259
Widscreen removal
Timmo, Recently removed screen from Majoord,s Rx, used a bicycle gear cable pushed thru from inside car then 1 bod inside car 1 outside and pushed an pulled like buggery until we got all the way around, it,s hard yakka but you will get it eventually. I cut the rust out then used Aluminium flyscreen ...
- Fri Jun 30, 2006 3:34 pm
- Forum: Subaru Chat
- Topic: L SERIES EA82T.... COIL OVERS??? HELP
- Replies: 15
- Views: 3762
L Series Suspension
Sub-Lover, I gather you are trying to lower the ride height to improve centre of gravity. This is what I did succesfully on an RX. Sourced front and rear suspension,struts springs and shocks off 2WD L sedan, took springs to blacksmith and had them heated and compressed around 10mm. Took Struts to su...
- Thu Apr 20, 2006 10:59 pm
- Forum: Electrical, Wiring and Lighting
- Topic: How Do i test alternator?
- Replies: 19
- Views: 5182
hey smoke, its majjjord here As you know in other thread I have probs too. It is normal for the charge light to go OUT when you unplug the plug on back of alternator, and you will also get no joy unplugging the plugs and trying to measure output! the reason is this: the charge light on your dash is ...
- Thu Apr 20, 2006 9:00 am
- Forum: Electrical, Wiring and Lighting
- Topic: RX Alternator problems
- Replies: 1
- Views: 1067
RX Alternator problems
I am driving Majjords RX at the mo and have issues with Discharge light and Brake Warning lights coming on with engine run. We thought it was Alternator and have swapped 2 over with same problem each time. Checked wiring alternator to battery with the meter and there are no breaks and the fuses chec...
- Mon Nov 21, 2005 3:54 pm
- Forum: Subaru Chat
- Topic: best place for a clutch kit?
- Replies: 1
- Views: 1480
Clutch Kit
Steve,
Don,t know where you are but if in Brisbane Direct Clutch service Albion know their stuff, They made up a double diaphram unit for for majoord,s RX which works brilliantly.
Majordad
Don,t know where you are but if in Brisbane Direct Clutch service Albion know their stuff, They made up a double diaphram unit for for majoord,s RX which works brilliantly.
Majordad
- Thu Nov 17, 2005 3:40 pm
- Forum: Conversions, Modifications and Performance Upgrades
- Topic: What can you do with a slow subaru 89SWagon
- Replies: 6
- Views: 2287
Engine upgrade
Mars bar, Go for an RX turbo motor, easy conversion, bolts straight up, hardest part is the loom but you could get someone to help with that. I had and I miss a Sportswagon 1990 with this set up with TD04 WRX turbo and TMIC with Microtech Fuel only ECU and it was brilliant even useing only 7lb boost...