The ***ALL NEW*** AUSubaru.com.au Forums

mines an auto - dont have the hill holder the ventilated rotors are the same size they are just ventilated.. if you want to double check, look up in the DBA catalog and compare the dimensions for the ventilated and non ventilated rotors just thought you should know that there is possibly a thicknes...

check this out. all i have done is in there i think. if you want more info, lets not hijack this thread, but talk in this thread: http://ausubaru.com/main/modules.php?na ... opic&t=747

this is just the start. next you might consider driveline drag betwen each...ie... readouts at the wheels.

with the 4/100 pcd plates(same stud pattern as Mitsibishi lancer and nissan pulsar), they are drilled inside the original holes and the original studs then pressed into these holes. the fronts on my ute have been trimmed in diameter down to 140mm but the backs weren't. I also had the faces machined ...

Hi guys. I have now completed 15,000 kms on the hub and 15" rim conversion, including a straight through trip to Canberra. i did blow a uni shaft on the return but it turned out to be an inner joint on the shaft. Hence i replaced that shaft at Deniliquin then when arriving home, replaced all wheel b...

i am keen to take the mitsi on this one, and a mate wants to take his toyota too.

I can get you 4/100 pcd plates for 350 and postage

http://ausubaru.com/main/modules.php?na ... opic&t=747
This post explains all that has happened to this brumby. side indicators are off wrx (98 to 00) i think. bought off e-bay.

is that a winch in your front bar or r u just happy to c my bumper? lol

they are CSA edge rims. 15*6.5" with 4/100 stud pattern and 38 positive offset. As per a pulsar or a lancer. i don't remember which. I had the spiggot supports taken down to 54mm on the front and there isn't a spiggot support on the rear. It isn't possible to keep any spiggot support on the rear hub...

Finally got the 4/100 stud pattern fitted and running beautiful. Comments welcome.
http://www.impactflooring.com.au/soobie ... e-side.jpg

could the adapter be the problem?

So I made a wedge shaped adaptor to level the Carb, it was welded to the standard manifold

the baron is nor often wrong. just when it comes to women...lmao

steve from rising sun gets my vote. awesome support too.

Thanks to those who turned up and sorry to those who couldn't or didn't. I enjoyed it and sorry i forgot to charge anybody for anything. I will try better next time...lol
Drop in anytime guys. You r always welcome.

Bump!! Update.. Drinks on hand: Crown Lager $2 Sterling Light $1.50 Coca Cola Cans $1 Food: free. Because everyone should eat well. Please post here if you want to work on your car as I will need to ensure space for each vehicle. Approximate arrival time if you can too. Cheers. Beer o'clock now. Cya

Hey Tasbrat, Happy New Year. Got your dash yet?

hmm... I'm really pissed off... I can't come on Saturday. I just pulled my exhaust off so I could replace the gaskets with better ones as it was starting to leak pertty bad again. when I got it off I found the welded up plug in the stud hole was broken loose and oil was coming out the hole again, a...

2 to 3 grand will leave you with ricing only. Sorry, but when you add up 1000 for an ej 22. 1000 to rebuild it to guarantee you don't have to take it out a month later, 2000 for awd gearbox and rear diff and disc brakes, not to mention the hidden extras we all come across. They alone add to hundreds...

I hope you and others know that when you r looking for parts or ideas, there are many people from many origins with similar interests that frequent possible suppliers. Interstate or not, we can all help each other. Why else are we here?