The ***ALL NEW*** AUSubaru.com.au Forums

14" rims with tyres for L, leone , brumby http://www.gumtree.com.au/s-ad/belmont/ ... 1010520692
Liberty bucket seats http://www.gumtree.com.au/m-my-ad.html?adId=1010520795

sold

if the big hit which dented the rim? was bad enough maybe the radius rod mount has been moved?

if you have powersteer check the rack does not slide between clamps and crossmember.

taza wrote:Oh I reckon it will be. Bloody wish I had a snorkel as I feel a few deep water crossings coming along.

can you attatch a tarp or canvas to hang in front of grill/bumper for water crossing then after water flip up onto bonnet for airflow?

checked wheel alignment, toe out ?

The ohm (symbol: Ω) is the SI derived unit of electrical resistance, named after German physicist Georg Simon Ohm.

wikipedia

more of a repair than anything.i replaced the nylon bushes on the shift rod joint for the gear lever.it will be easier to find 5th now when i get my license back tomorrow

MY/Brumby low is 1.47

is the L series 1.59 low ratio compatible with your gearbox.
i have done it with awd 92 liberty box.

seems well made, couple of press studs not alligned perfectly but managed to force them on

thanks man
let me know a good time to collect

hi Alex
if u stilll have the ej22 i would like to grab some parts please.
i have had some intermittent backfire and rough running at startup.would like to try swap some things like coils, sensors .
regards, anthony

june long weekend i caught a bronze whaler , spanish mackerel and blue bone from the beach at cape peron. were only around 50 cm the first two and 30 for the blue bone but tasty. others caught schnapper and some decent mulloway around 80 cm maybe 12 kg. around 200m west from the carpark just before ...

it has been a problem since install but only when very cold morning.
no code wires were working when trying to check for faults.
harness was done by third party no longer operating

on cold mornings the motor takes several attempts to start, sometimes over a minute of intermittent cranks.
have cleaned MAF wire element. checked plugs and leads, used injector cleaner.
valve seals are worn and not sure about coil packs and oxy sensor.
any suggestions?

change low ratio to 1.59 with L series part

i used to use a screw driver to short the 2 starter motor connectors to start an old holden years ago when the solenoid was stuffed

saw a burnt wreck bogged on edge of drain at middle area of corner welshpool , gibbs and maniana rd in queens park this arvo.might be 1 or 2 mags ok as well

i have a 92 ej22 wired into my ute, it needs valve stem seals and camshafts seals.
any oil leaks on the motor for sale? any idea of compression/ condition ? have any good d/r 5 sp manual awd g/boxes ?