The AUSubaru.com.au Forums

Spent just about all weekend in the garage...got a good amount done i figure. Conisdering i was working by myself most of the time. Friday night...got all these things out by myself in like 4 hrs. http://i2.photobucket.com/albums/y44/DoItSidewayz/PICT0153resized.jpg http://i2.photobucket.com/albums/...

Actually. the Ej20 and tranny are coming from a Legacy Turbo (Canadian car). My buddy had a Legacy turbo, which was stock with a 2.2L SOHC motor. When that started getting run down (around 230,000 km) he threw a JDM EJ20 into it. So..i'm using the JDM Ej20, Legacy Turbo Tranny, and Legacy Turbo 3.9 ...

i had a complete 1990 shell. I replaced every wire in the car with the wiring harness from the 1990 Shell.

Putting an ej20 into an '85 RX.

What kinda fuel pump do i need??

will the stock RX pump have the minerals?

i converted my car over the EFI. Oil Feed. used a t fitting for the oil pressure pick up in the back of the block. just ran a line around to the turbo! Intercooler..i was running a Swift GT intercooler the engine lasted a good while. i never really got around to tunign it properly. One day it'll mak...

EJ22 Turbos were not released on the Australian market but they do exist. However as they have the same heads as an EJ20 Turbo they don't fit into a Brumby. assuming you are talking about the USDM EJ22 Turbos that came in the US Legacy Turbo.....they used a single cam head.....they might well fit i...

interesting concept...however with those pivots i believe the towers will still beable to move inwards and outwards. or even individually. you are right on them moving up and down...they will do that, but they can also move in/out, or front/back. Mainly because everything is not in-line (because you...

been there. done that.

here in Canada the justy got the 1.2 L 3 banger.

i threw a turbo from the EA82T's at it, and ran 10 PSI...Thing went like a bat outta hell.

my guess was 1700 lbs, and 125 hp.

160 KW at the wheels...did they not have more than that stock??

i think we did some research and thinking it made 220 HP at the crank stockish...which is like 165 kw.

Do you think the added weight of the Ej20 in the front has any effect on the understeering??

I run the same setup in with the local car club (85 RX with EJ20TG). The previous owner did the conversion and the car has the following mods. EJ20TG RS Legacy 4.111 GBox WRX Flywheel (engine was an auto) EJ20TT Clutch kit RS Legacy 4.111 LSD EJ20TG loom spliced to Leone rear loom (doors back leone...

driveshaft lengthened??

people over here are telling me shorter!!!

from looking at the 2 trannies it looks like the EJ tranny is a little longer....

the front driveshafts will just slip right on though..corrrect?

also. is it worth using the WRX tranny?? or just use the EA trans with an adapter plate??

i'm worried the EA transmission will not take the power of the EJ20

Hello all, this is my first post here. I'm from Canada decided to come over here as some of you guys have good info about the EJ20 swap. Anyways. I currently Rally a 1985 RX Sedan in Performance Rallies...We have been doing very well with the stock engine in production class. however we have blown i...