The AUSubaru.com.au Forums

pedal box on a brumby?

yea im on the p plates aswell. same excuse as someguy!

genrally people go for a sub an 6inch speakers. 6x9 can make the subs bass unclear.

hey gumbi. sorry for the really late reply! all is good. had a bit of trouble with the clutch cable. so i got a custom one made up that mate the good of the brumby and the L series clutch cable. also mounted a bracket to give the extra leverage needed for the cluch. still havent put the brumby 4wd s...

We have successfully completed the conversion.We used the L clutch cable and clutch pedal as suggested.The fit of the L cable in the Brumby was poor as was the clutch action and feel.The end of the cable eventually failed.My solution to this problem was to have all the L fittings at that end of the ...

Oh ok then steptoe! I just want to make it more friendly to the eye and make it look more legal. Cheers for the info it is always welcome!

Cheers Bennie! It would smarten it up a bit! Will have to find them now!

hello, after my 5 speed conversion the clutch cable snapped right behind the clutch cable. was wondering if i hooked it up wrong for that to happen? Also I was wonderin if anyone has a picture of the welding needed to join the L series gearbox leavers to the brumby 4wd lever? Lastly i was wondering ...

alright im puttin it back together tomorrow minus the brumby 4wd gear selector. will hav to be a job for another day.

well i hav half taken the L series 4WD lever off. havin a look maybe a real dodge picture will do (even if its in crown)! really missing not drivin the brumby....hanin to drive a holden vs.....woo hoo...

If you get really stuck lmk and I'll send you some photos. It's only a short extension you need to weld (can't recall how long, it was a while ago). I had a quick look on USMB and can't see it referenced in their write-ups but I read it somewhere. Dean. a photo would help me with it! if it is possi...

ooooo that would be good! i will hav to look into it tomorro!
cheers!

nncoolg wrote:You shouldn't need to cut anything.

Well i used the gear linkages from the L series. The L series 4wd selector doesnt line up where the brumbys did.

has anyone put the interior of a L series in to a brumby?
an just the bit that sorrounds the gear stick an 4wd shifter? just wondering if that will work/look neater then me cutting the original plastic?

Hi scoobymine, I am Callums dad I am helping him fit an L series 5 speed to his Brumby. We are doing this at home in the shed with a concrete floor.The trans is heavy so I made out of scrap a support frame and fitted this to the lifting pad of my2 tonne trolley jack. With both ends of the ute up on ...

This weekend just gone we "mounted" the gearbox in the brumby and i am just wondering which way the brackets go onto the gearbox because their is a small an a big bracket? and I think I fitted them the wrong way. I have the shallow bracket fitted to the right side and with that large lump ground off...

Looks very nice chplat! i was thinkin of doing the same but different! definately think the carpet is the way to go!

2 inch pipe fits good with the space in the Brumby? no lifting needed?

lol dam ok then.

Is it possible to tell if a gearbox is a 3.7 or a 3.9 from the number of plines on the gearbox input shaft? My gearbox has 24 splines and the diameter is 24mm.