The ***ALL NEW*** AUSubaru.com.au Forums

correct

I want to sell my brumby the body is rough but would be a great project the majority of the hard stuff is done. firstly the good stuff thats done. eg, the engine transplant,wiring harness,cv's,radiator, lowered king springs, Impreza disc brakes all round, 5 stud hubs, 16 inch wrx mags and 3 spare wr...

thank-you

some one was selling front bumpers for brumbys on ebay a few weeks ago some where near lismore or inverall has anyone saved this item if so need sellers name as i want one apparerently they where of ute that had bullbars installed thanks

there is a good chance it is the slave cylinder,Common problem. 1. Pull it out pull it apart. 2. Clean it in metho make sure you clean metal plunger really good. 3. Check rubbers or replace. 4. Lube with fluid. 5. Put back together. 6. Re-install. 7. Bleed system. if this doesnt fix it, it will be t...

ii have about ten brumby wheels with tyres to give away some with good tyres some with average tyres some with poor tyres all rims are in good condition also have a couple of l series rims with good tyres. I also have a set of 5 Sunraysia rims with 4 good tyres 1 is worn . 4 are gunmetal grey and th...

Tailgate stickers on ebay

i read these post all the time and only answer when i can contribute positive like i have two cars one has a remote one doesnt why is it when i go to 7-11 to get my icecream in the one without the remote do i walk inside only to have to walk back to lock my car and when in the one with the remote wh...

i read these post all the time and only answer when i can contribute positive like i have two cars one has a remote one doesnt why is it when i go to 7-11 to get my icecream in the one without the remote do i walk inside only to have to walk back to lock my car and when in the one with the remote do...

the came in tan, grey,blue and black cant get tan cant get grey or blue can only get black i have ordered 7 sets they are new old stock should be here about 14 days

the problem is most likely in the clutch slave cylinder if pedal is sticking my daughter had same problem in a 2001 rx i pulled out the slave cylinder soaked it metholayted sprits cleaned it and the rubber put it backed together then bled the cylinder and it has been all good since one subaru dealer...

Who needs window winders? I can possibly get some window winders, they are the chrome ones with a black insert and knob yes the flash ones (genuine Subaru) price is around $35-$40 If you want a set let me know.

taking your car to kmart is going to cost just just as much as any where elsetake it to some one that does aircon to tell if its the air con bearing place a long screw driver on the compressor and you will feel a dodgy bearing vibrate along the shaft do the same with the small pulleys the belt run a...

what size are your plug leads if you run gas you really need 9mm spiral wound stainless as they can short out under load

contact me at http://www.thebrumbyshop.com if you need one i should be able to find you a good one

i saw a 10-15 year old mitsubishi L300 van with the best/approaite? personalized plate ever it was SHT-BOX

where the clutch cable outer is held inside the vehicle left hand side of steering column thre is a mounting point where the weld breaks or the point it is welded to collapses due to metal fatigue

check the pedal box i had same problem about 3 months ago

outbacks have 3 different types of clutch and pressure plate types does any one know the differences any hints would be helpful thanks

and standard were white subaru wheels