The AUSubaru.com.au Forums

im not sure how you are drilling spot welds, but i use one of these: http://www.ebay.com.au/itm/HSS-3-8-10mm-Spot-Weld-Welder-Drill-Cutter-FP-/350505741457?pt=AU_Car_Parts_Accessories&hash=item519bc52c91 well worth the money. i use it with the cordless drill so you can slow it right and use plenty o...

500hp would just get you in the 9s :mrgreen: if i could drive...but the ute weight is 1066kg stock, but may be 1300 by the time i finished. ie, awd gearbox, rear diff, tailshaft etc if you look on post 26 in this thread, you will see the jumbuck rims when they were brumby rims, i had them blasted a...

yea thats with the 1.8 thats in it now. the 2.4 i need to decide if i want 500 or 600hp. and 11s are in the bag. unfortunately evo and subies are the same at that level and either will spit gearboxes fairly regularly unless a heap of coin is thrown at it. the other option is to go for a auto convers...

thanks guys, i went with a colour for the rims as close to brake dust grey as i could get. i have had white rims before and these grey ones never need cleaning. ;) and toongs, it goes way better too. its at 15.6 now, but will be mid 14 with the rear diff, then to wind the boost up to 14psi or so for...

sorry its not a subaru

hi guys, havent been on here for 12 months or so, i see niterida is making huge progress on the brumby. i dont think it could have gone to a more ingenious guy http://ausubaru.com.au/showthread.php?t=18388 as for me, i still have a targa brumby and a heap of sti gear for it. it down south at oldies ...

man, thats awesome what you have done to the old brumby, with the floor out it must be tempting to channel it a couple of inches. i will be in geraldton over xmas, maybe i can have a look in the flesh and share a beer or 2. i cant believe the effort you have thrown at this car. truly inspiring. awes...

Item...............................ea81 and gearbox. Description.......................complete long engine and accessories. missing distributor and altenator. complete with carby, starter, aircleaner+housing, waterpump Condition...........................unsure, was in my brumby when i bought it, i...

from http://homepages.tesco.net/~A10bsa/bscbot.htm BSCy This fine thread profile was formulated for, and is well suited to cycle and motorcycle applications. Its fine pitch, allows high torque settings, and resists the tendancy to loosen under vibration, the larger core diameter also gives greater s...

what about that idiot that decided to use cycle thread? that is a pita too.

yep, you can buy them in shops

get somone else to drive car slowly past you or around you in a circle as you listen for noise. try to pinpoint its source to which side and weather its at brakes or inboard. try pulling handbrake on a couple of clicks or riding brakes, this will show up rattly pads or calipers. if brakes dont affec...

i bought a full gasket set for my ej25 dohc gen2 outback from the USA. it came with 4 rocker cover gaskets. 2 suited my dohc and other 2 didnt. maybe they suit the avcs heads. the kit didnt specify gen2 and i really only bought it for the head gaskets.

rotormotion are rotary tuners and just around the corner from me. in the morning and early some evenings the sound of 1000 wild victa lawnmowers straining against the dyno drifts over the languid air. it is music, sweet music. sometimes they test them on the quiet backstreets and the screaming of th...

agreed, kelvin is the frequency of light output and lumen is the brightness. 1 lumen is 1 candleworth of light. as ap says, the lights with the best penetration are the 4000k ones, the 6000k are bright but dont penetrate well and the 3000k ones are golden yellow and not the best either, they reckon ...

mmm phuket!

what about that fuse under the bonnet that makes only front drive work. ii think its near the brake master cylinder? someone?

i gone and got a better start point for my conversion, so am getting rid of my old brumby, minus motor and box. It has the noched rails and gearbox mounts sorted, l series lower arms modded for wrx struts/hubs, modified for turbo xmember, 13" sunnys and plenty of other bits done. and plenty spares. ...

found a better brumby as a start point so gunna pull all the goodies from one and into the other.
so if you want a brumby that the body has notched rails and gearbox members are sorted look in for sale section.
here we go again.

old carbs that run rich is often blocked bleed jets/tubes and dirty in emulsion tubes.

low on compression? look up leak down testers or check net for plans and build your own. mine is here if you need to use, got to get car up when i home tho. should be home tommorow till 4 nov ish