The ***ALL NEW*** AUSubaru.com.au Forums

Am about to do some experimentation, so looking for a couple of inner cvs, any condition, and also the shafts out of the gearbox that they slide on to. also any condition.
hopefully free or cheap.

In northern suburbs of Perth preferably.
thanks

You could try a silver hammertone, i have used it with a paint brush works fine and has the advantage of being very strong, only problem is it ends up with a sheen like galvanised iron, and takes a few days to dry properly, there may be variety that is a plain silver, try rustoleum and see what they...

Looking at buying one or the other. how do they compare, what are the strengths and weaknesses,which would be best for a touring car, must be automatic.

thanks

Toonga want to sell the falcon carby? I have been looking for one for the commodore.

seeing as the steering has been vibrating since you have had the car I would suggest this has caused severe wear in the whole front steering and bearings etc, so the whole lot would now need replacement. just standing on a breaker bar will not tighten the axle nut sufficiently, I use about a 4foot l...

have an air conditioner compressor , steering column and wheel and a carburettor and water pump only ran for about a month for this.
For 1800 manual.
$50 the lot will separate or post except column .

just be aware that there are 2 types of pump, the distance between the front of the pulley flange and the rear face can differ by about 6mm to 10mm, makes it hard to fit if they don't match. for information I have water pump off a ea82, only ran about 2000k before the motor died so like new, $20 plu...

if you are planning to use ego i can only suggest you do a search on ego freight problems. they lost a holden fuel tank from queensland for me. not the sort of thing that drops down behind the seat.

hotroddisorder.com/p/casting-at-home-making -flower-pot and
cyphertext.net/~gfish/forge and
rotblattsculpture.com/Articles/building a bronzec

for some ideas.

yes it is a big job requires a major work over on the dash etc. if you really must do it buy a complete car wreck with a a/c and transfer the bits and pieces you wind the cables to the vent system are different, there are valves and vacuum hoses and different switches and heaps of small things. unle...

my wife wanted to send a couple of lipsticks to daughter in UK.
went to AP yesterday, 2 lipsticks = $18.
forget it.

sorry cliff i think you did it to yourself. A set of front hubs is not a set of free wheel hubs, it is a set of front hubs as delivered. you should have asked for free wheel hubs. they are available for your car for around $175 there is a guy in WA advertising them for the zook on gumtree. i believe...

think you can cancel any credit card transaction (which paypal is) by lodging a complaint with your credit card provider. is a long drawn out process though and you have to prove non arrival or wrong description of goods or service. i got dudded off gumtree by a guy called m. cox of tamworth he rang...

only telling you what the licencing people told me.

actually if you are wa resident you cannot legally drive an eastern states registered vehicle at all the moment you cross the border you are illegal. however you would have to be unlucky or stupid to get caught out. i found this out when i went to register my car. i actually got pulled up by the boo...

I did one last year from tasmania. easy. make sure you get a full written receipt from the seller, each state has a register where you can check there are no encumbrances (money owed, hire purchase, bankruptcy, etc.,) you need the rego of the car chassis number and the owners name and address. if it...

tidying up found a dizzy and cap dizzy no is 22100aa450 d4p86-01a8x03
height of cap from base of cap to tip of spark plug lead holder is about 64mm give or take a mm
it came off a ea82 i blew up.
any interest?
can't do pic my camera lead has gone missing.

why bother?
the l is gutless enough without trying to run lpg.

the sellers of phosphoric based treatments usually recommend the loose rust be removed with wire brush or blasting. completely removing the rust to shiny metal is useless as the acid needs some rust to enable a conversion to take place. they also recommend that the coating be allowed to sit for a da...

have heard of this in other fwds, apparently its something to with being on full lock there is not enough tolerance in the driveline to allow the gears to release. never got the full story on it though. I have had the l series lock into 4wd on occasion that can be annoying. cured it, sold the car.