The AUSubaru.com.au Forums

In WA I need to source parts, what are my options other than dealers?

Ended up getting wiring adaptors from Repco. Only issue is the trim needs to be cut to accomodate the slightly wider front of the Pioneer deck.
What is the best way to cut the trim?

Hi all,
In WA Perth, where is the best place to source a replacment exhaust system.
Couple places already seen say they have to make up the system as things like mufflers are not a listed after market item. I do find this a bit odd.

Are about to replace old otiginal clarion radio CD palyer in my 1997 Liberty. Any special hints to make it easy.

Furthre to my previous post. When sourcing parts found that very few non genuine available. finally decided to use all genuine parts and had to wait for stuff to come ex east.(live in WA). The few non genuine parts did source did not really look to have quality and return. If you are going to repalc...

This sounds so familar. What you have described is exactly what I have just dealt with. After much searching replacing things it was a slight crack in the head at no 4 exhaust port. I ended up getting both heads rebuilt / remanufatured and all problemns solved. It took three months and many repeated...

Sorry no pics, though what you describe is exactly what I had.

Had same problem. first thought was just belt tension, adjsuted belts problem still persited. Replaced all belts with Gates (blue) belts. have had no problens since fitting them.

This seems exactly what I have just dealt with.
Was a small leak on exhaust side in head,passed had all tests looking for blown head gasket. No systems of blown head gasket, no over heating. was showing bubbles in overflow tank.
Had both heads overhauled, problem solved.

Hi all,
Need some one to service my Subaru in Perth WA. Any good repairers out there.

Problem was eventually solved. It was a minute leak / cracked head on exhaust port side of number 4 cylinder. The so called expertrs let me down on trying to solve this problem. Dealers where not equiped to diagnose, just wanted quick solution at heaps of cost. Had advice to replace engine to repalc...

Thanks all, It has none of the other signs of a blown head gasket, eg rough running etc, can thrash the bags out it and does not even look like overheating, When I go to top up the radiator I just put back in the radiator what is in the overflow tank. I have heard about the jacking of the car to get...

I have all the tests, KT for blown Head head gasket, presure test every things and these do not highlight any problem.

Got a 97 2.5L Rx liberty, great car only 120K on clock. Had radiator replaced, just seems to push coolant into overflow tank and coolant does does not return to radiator when cold.
any ideas whats going on. had all checks for blown head gasket etc and everything OK.