The ***ALL NEW*** AUSubaru.com.au Forums

I have a 1989 Brumby Roo Bar and Bumper for sale. These have been sitting around for sometime and need them gone.

Also 4 standard 13" wheels for brumby. These are the standard factory wheels (silver with tyres).

I'm in Mandurah
$100 the lot. or split up.

I've installed a new radio in my Brumby and I get a lot of static when the engine is running. Drives me insane. What do other people do to stop this happening. Mainly on the AM stations. I have the earth hooked up to the self tapper on the glove box. Shouls it be mounted elsewhere? When the engine i...

Ordered the pump thru SUperCheap $140.

It was a universal type. Pretty easy to fit, had to change one fuel line with a bend in it.

Haven't got the official number but it was just an ordinary filter about 50mm long, in and out either end. Changed it a couple of times. over the years. I put a new fuel pump in and gave the key one turn and it fired up first go. Drove around the block to "try it out" as we do. What a difference a n...

Started up the Brumby in the driveway to go to work and it spluttered to a halt like it ran out of fuel. Lucky it didn't halt in the car park at Bunning's or the By-Pass lights...........I'd have to walk home. Checked the carby that night and it was dry. Ordered a new fuel pump and it arrived today ...

Got a set for my 89 Brumby from Pedars. About $150????? a set, I think.

I noticed the other day a small pool of coolant under the Brumby and found it was leaking from the drain plug in the radiator. Before I unscrew it and maybe break it, is it plastic or metal? Does it screw into the radiator or is it soldered in? The tap itself seems to be plastic. Can I just take it ...

You don't need to drill holes in the floor pan to un-do the torsion bar. Just climb under the ute and unscrew it. It's a 19mm bolt. Put the ute on ramps. Be aware though this doesn't lower the ute but relaxes the tension on the torsion bar. Makes like a softer ride and when you put something in the ...

Photos of the cut away parts of the side step kick panel.

Glad to help. It's a bit complicated with the drivers side as it had a lift seat in case you are a short A#$%se. Can explain but take awhile. Also just a bit of advice............don't use a rattle gun with a uni joint in a confined space like a Brumby cab. Apparently the 14mm socket tends to fly of...

Just did to my Brumby. I got the Liberty seats from Guyph. Take the rails off the lib seats and bolt on the Brumby rails. They virtually bolt straight on. The rails near the drive train tunnel fit without and mods. It's the outside rails that need the mods to fit the holes. The lib seats are about 7...

The problem as I see it is you want a good job..........but cheap.

The two don't mix.

Other option is to do it yourself. Finish the spray with a clear coat. Looks OK.

What's the car worth? If you spend 2g's on a paint job, is it going to increase its value 2g's?

Here's a pic of mine.

I've since changed the seats to Liberty seats thanks to Guy.

I recon this colour scheme worked OK.

Also changed the steering wheel. Cost was about $120 or less.

Recon doesn't take much to rack up 4g's in repairs these days. Agree with Sven, if you're insured then put the claim in and they chase it down. They track the guy down if you have a name and number plate. No hassles then. He just claims it off his insurer. A giant merry-go-round...... Did you report...

If you want rails for the seats I have the set that came off the seats I got from you.

You're welcome to them.

Ring me or PM

Al

Just took a picture of mine.
Yellow(-) and Black/White(+) from Dizzy.
Black(+) and Yellow(-) from wiring harness
Black/White(+) from harness

Hope this is helpful

Just saw a Brumby for sale in Mandurah. I know the guy and car as he bought my canopy off me. Brumby is in good nik. 1991 Sport model. Good wheels and tyres. Basically standard, no rust to speak of. $3,500ono. PM me for phone number. Just saw it parked on the side of Lakes Road and got the number of...

I did mine myself with film from Supercheap. One roll for $35.00?? did all three windows and a windsceen strip as well. Get dark Limo tint. Not hard to do just be sure the glass is clean. Use a razor blade to clean glass and cut film larger than glass then trim off excess. Be sure you use soapy wate...

I had trouble with my Brumby carby and just packed it up and sent it to "Carburettor & Electrical" in Fremantle. They have been around for years. Came back like a new one. Cost was around $250. They also rebuilt my Dizzy for extra cost. Either post up or Courier. Be sure you drain all the fuel out i...

When I did up my Brumby I stripped all the interior out and got some heat shield from Clark Rubber. It's foam on one side and foil on the other. It's about 10mm thick and is used under the bonnet of cars. Just peel off the contact paper and it sticks on. I did this under the hood and on the floor of...