The AUSubaru.com.au Forums

Well it turned out to be the seals for the injector were broken so I replaced them. Now I have another problem the intercooler got filled with engine oil, why would this happen?

Hi, I just finished body works on my leone, ill upload the pics soon. I have an Ej20g running in it. My friend interchanged the fuel pipe by mistake, the engine would not start I corrected the piping, the engine started. (I’m using a Bosch fuel pump) I went for a test drive when I got back the car s...

Well I welded the center diff that’s all, blocked the front shaft holes with a steel cap I got fabricated. It’s really cool I can drift all around and it handles well all you got to do it is master it and control the drift the only problem is when it rains then I’m ice skating all over the road lol ...

Hi, I’m working on my 92 Leone and would also like some help from you guys, went through some post some great work done, I don’t think I can come even close to what you guys have done with your rides. This is what I got for it 1)Got a Wrx 96 Engine for it, using a Z4 Ecu with a stage 3 chip on it. 2...

I got another cylinder head and worked well for me and mostly subs tick on the left side dnt really know why...

I have made an adapter plate from mild steel, ill post up pics once I have finished all of them.

Thanks.

Hi,

I own a 92 Leone it’s got 15” rims on, I would like to put the 17” rims. The problem is the 15” rims are 4 stud and the 17” 5 stud, can any modification be done without changing the hub and the rear drums?

Thanks,

Regards,

Amk.

I need some help, I would like to know how the connecting rods sit on the crankshaft for an EJ18 and does the Key face upward for all the con-rods?

Basically what is the right way? How is it done?
Thanks,

Regards,

Amk.

No I didnt change the rear diff, could not find one still searching but i prefer rear wheel any day so really need to figure a way out...

Any other way part from this?

Got an EJ20G running in my Leone with an STi competition gearbox, like I said in my previous posts I was using the rear diff to run the car, my front shafts broke so was on rear wheel drive. Now I fitted the STi gearbox connected the rear diff like before but the car would hardly move so I noticed I...

I was wondering that the previous gearbox for the EA had the 4wd selection, but since my front shafts broke I was using the rear diff but selected on 4wd, now since this new gearbox EJ, its AWD so I need to connect my front shafts for the car to move right? The rear diff won’t work solo unless I con...

We have a new prob, i bought a brand new clutch plate and pressure plate, the clutch is slipping car doesnt even move.

can any one upload the exact pic of a pressure plate and clutch plate for an EJ20G please, i think i have got the wrong one...

happened to me once, it needed new pressure plate and after i replaced it was lot easier. Metal fingers on pressure plate tend to go hard due heat. I wld check the cylinder and others before you pull the box off again. Cheers AP I was thinking the same... the Pressure plate is gone... and getting t...

Not sure how the free-revving characteristics of the engine really relates to the condition of the clutch....I'd say that's an unrelated problem. Here are two more possibilities. 1 - Slave cylinder seized. Did you try taking the slave cylinder off the gearbox, operating the clutch pedal, and seeing...

Thanks a lot for all your help. I managed to test the car today but the clutch is really hard still after trying to check through all what you guys have advised me on. We have another problem, the car on bout 5k rpm hardly moves so I think the clutch is gone… is this why the clutch is hard? Here are...

This is *roughly* correct. The pipe from the master cylinder should be connected to the slave cylinder (which is bolted to the gearbox). Did you get fluid flowing through to the slave cylinder while bleeding the hydraulics? Are you able to post any photos of your completed setup? Yes i did the blee...

I got an Ej20G in my Leone, I was using the original gearbox of the Leone to run the car then it got messed. I went out got an STi competition gearbox 4:11 with flywheel, clutch plate, pressure plate and release bearing. The gearbox is 2nd hand so is the flywheel, clutch plate, pressure plate and re...

If one was to increase boost on an Ej20G, from 1 bar to 1.2 using a boost controller, what other factors should be considered like octane what else?

Thanks,

Regards,

Amk.

HI, I own a Leone saloon, has an EJ20G engine in it but using the stock Leone gearbox. My prob is the gear box is blown. I was using the rear diff throughout, my front drive shafts broke so I continued to use the rear diff, it was a rear wheel drive now lol. 1)Should I get another Leone gearbox? 2)I...