The AUSubaru.com.au Forums

Hi all i have a 88 Brumby and its headlights really suck its the single sealed beam model anyone got any ideas for a headlight upgrade??

Thanks Toonga i will try all that on the weekend and let you know how it goes will 10 degrees of advance be ok on normal pump unleaded could i push it to 12? Now that all the plolution gear has been disconnected and the air valve on the exhaust is blocked off would there be any advantage in getting ...

The return line to the fuel filter/tank is blocked off close to the filter as there was no where on the weber for its connection. I am going to measure the fuel presure and see what it is as it has a non genuine replacement pump on it. Does anyone know what the right size jets are for the weber on a...

The timing is set at 8 deg was set to 10 deg although going back to 8 has not changed anything Using an electronic dizzy with normal unleaded fuel I am trusting that the float level is right as the carby is a new weber 32/36 with manual choke, apparently jetted to suit the EA81 engine and it doesn't...

Thanks everyone a carby shop was the most obvious answer to these problems but i was hoping to take a DIY approach to try and fix my problem any ideas?

Hi everyone This is my first post. I have a 88 brumby with a ea81 engine running a weber. My problem is that it runs on does anyone have any suggestions? The carb is a remanufactured 32/36 to suit the ea81 engine with a manual choke with a redline manifold. The engine also pings slightly on light ac...