The AUSubaru.com.au Forums

its giving me an error 24 which i believe is the duty c sol, also getting torque binding , but before i replace the solenoid i wanna make sure there is not bad wiring etc

already saw that pic , not there , unless its on our passenger side but the wiring doesnt seem to go that way, this is mad

anyone have any idea where my tcu is located on my 1998 gen 2 outback limited auto. its definitely not to the left of the steering column as everyone is telling me. the wiring goes up and then along towards the fuse box. Am i being an idiot? just cant see it

cool thanks guys , dont think i primed them and i used the seals from the gasket set. so hopefully with both them sorted should be good, shame its such a big job

i think i just used the seals that came with the engine gasket set

hi all , about a year ago i did a top end overhaul of my 1998 outback , the heads were rebuilt and skimmed by my local head shop and i put it all back together, just recently i realized that the engine was smelling of burning and once i removed the belly pan found an oil leak towards the front of th...

yeah the belt is the same

hi just rebuilt the top end of my ej25d engine from my 97 outback and was just in the process of refitting the timing belt , i brought a dayco timing belt kit from ebay with the pulleys, the number of the kit was ktba 161. ive just noticed that one of the idler pulleys is a little different than the...

got stuck into checking the tappetts here's wot i found: cylinder 1 inlet 0.18mm and 0.15mm exhaust 0.23mm and 0.23mm cylinder 2 inlet 0.14mm and 0.15mm exhaust 0.21mm and 0.23mm cylinder 3 inlet 0.20mm and 0.18mm exhaust 0.26mm and 0.24mm cylinder 4 inlet 0.18mm and 0.18mm exhaust 0.23mm and 0.25mm...

i will definitely check that out, im pretty sure the car was fitted with reconditioned heads at 150000km and the head gasket done and the water pump looks pretty new to , its done 195000 now so nearly 50000 on new heads

the engine is EJ25DNXDJE and i put NGK BKR6E-11 plugs in , it had NGK PFR6B-11 in before

its the twin cam engine, might be a head gasket leak, but not using any water or showing any other signs, any fool proof check i can do?? i think ill try a new sensor anyway and maybe some injector cleaner

a couple of weeks ago i bought a 97 outback very cheap that was running pretty rough, (misfiring badly) i checked the error codes and it had two, a 22 knock sensor and a 32 oxygen sensor, i started with the knock sensor which i replaced but eventually found a broken connection on one of the multi-co...

hi need help , gonna replace the clutch in my l series fitted with a rs turbo engine , the gearbox and the clutch set up is normal l series so i just need a tougher l series clutch plate ( i think) im based in perth so any info on where to get one or any info would be very helpful , cheers

hi , after a delay i decided to remove the timing belt covers on my 93 rs turbo motor to check out the condition of the stuff. check the pic ive attached , the bottom idler!!! really want some advice on the timing belt kit A: belt, tensioner, idlers , seal kit 380 bucks B: same as above but with hyd...

the intercooler radiator is mounted where the ac condenser should be , i got all the bits to fit the ac to the car , all pipes, condenser etc and was gonna fit the condenser back into its original position and somehow mount the intercooler rad in front of that , but never got round to it :(, which i...

bumpy

cool thanks for that , im gonna take the covers off this weekend and check the tensioner just to be mega sure, once again thanks:D

please help i need a new timing belt and the idlers for my 93 rs turbo motor , it was a jap import and the only numbers i can find are the ej2o , have checked all over on the internet and it doesn't seem to be listed anywhere, im pretty sure the belt has 281 teeth and is 30mm wide , that's the only ...

yep the history is exactly what the previous owner had told me :), has taken me a lot of soul searching to decide to sell her and i would genuinely want to fix her up and keep her if it was at all possible, will be a sad day when someone takes her away from me :(, im pretty sure i have got the milea...