The ***ALL NEW*** AUSubaru.com.au Forums

Yer I'm hearing you. Bunnings and Gasweld are pretty close together and are both close to me about 3km by road and I pass them on my way to and from work. Wanted to do some blasting on the other side of the wagon today but didn't happen because I wanted to get a white guard from B3 but discovered it...

LOL. one of the apprentices at work spotted it while jogging, He was thinking of buying it to launch his boat but decided he didn't realy need another car. So I pounced on it. It has had the canopy on it all its life and the tray is in amazing condition. Needs new struts for the canopy, which I have...

Yer but the blokes at Gasweld know what they are on about and if I have a question to ask they will answer it. Try to get an answer from staff at Bunnings or supercheap. Yer right!

self confessed brumbaholic.

ah that side is almost done used a broom handle shaped to bend the sheet onto place then used a pneumatic chisel with the end ground down to a ball to peen the metal into the corner. http://ausubaru.com.au/attachment.php?attachmentid=3511&stc=1&d=1345257428 http://ausubaru.com.au/attachment.php?atta...

Yer Al, where did ya get it !

yer just visited there site and had a look at the build photos

HMMMMM IMPREZA UTE !!!!!! would save putting an EJ20 and suspension into a brumby. Just cut the ass out of a prezza.
Could be next project nah frig that

Ha Ha just kidding.

Bennie, yer she has a whole lot of rust and if we get 12 months of fun out of her I will be happy. I can see more rust when i look up the holes in difficult spots most of it doesen't look structual but I am sure it will later down the track as I plan on driving this one on beaches it hasent got much...

My MPFI L wagon used to do that.
I went over all the electrical conectors on the motor, sprayed them with CRC 226 and made sure they all had good contact, problem went away.

AHHH remember this one. Managed to cut the rust out with a 5" makita angle grinder, it is 5" but has a 4" motor which makes it ideal for getting into tight spots. The cutting wheel was one of them 1mm thick ones. http://ausubaru.com.au/attachment.php?attachmentid=3505&stc=1&d=1344758777 Got the meta...

Toonga yer they look like they havent done much. Cliff I have a reg and a dispsable gas bottle, Have only used it on Aluminum though. Gasweld has some 0.8mm flux core wire and as i just ran out I will get some from gasweld tomorrow. done heaps of repairs today but forgot to take a lot of photos. Thi...

TOONGA wrote:Subaru Bunbury cleaning out its cupboards

http://www.ebay.com.au/sch/bunbury_suba ... 4340.l2562

I just got a whole set of brumby pedal rubbers for 22 dollars delivered

TOONGA

yer me too just in case I need em one day

On my way to work depending if I am late or early I can see.
1 white Brumby traveling my way and one white one going the other way.
on the way home sometimes a XV traveles same way.

To try to get the NSW forum moving how about posting a soobie sighting, weather it be a regular on your way to work sighting or a one off something different soobie.

COME ON YOU BLOKES

Come on nsw !!!!!!

I have an 00 auto outback. To look out for. leaking rocker covers. worn steering rack bushes my tailgate leaked as well but it was only an open join, a thin bead of silicon fixed it. Most subarus for sale seem to have just below 200,000ks or just below 300,000ks, Why ? cause they will need timing be...

Yer I'mm gunna have to get more sheet. Cliff thanks for the tip I have one of those bottles and some wire but will save them for something more important. If ya have a look at the piece I welded in you can see on the edges I put a backing plate on the edges to take some of the weld. OK jobs done. Ha...

SB The steel sheet, I think is called zincalume is 1mm thick. Gassless mig has 6 power settings, for this stuff set on 1 and adjust wire feed to suit. on 1 it is too powerfull to do a constant run so I just pull the trigger for a second wait another second, kinda pulsing the weld, once ya get going ...