The ***ALL NEW*** AUSubaru.com.au Forums

What would Willy Nelson say.

Blue slip inspection tomorrow.
Hope it passes.

Just bought a tinnie (12ft V with 15hp) it will be towed and launched by one of the soobies though. Probably the MY wagon

Good stuff, it is just a mecanical thing.

I must have been on a different wave length at time of posting, sorry

Have put a master cylinder kit and an oil pump kit in this one. Gave it a buff New gas struts for the canopy Oil change coolant change it had some rust around two of the tarp lugs, I have blasted the rust and am painting the area but neglected to take any photos Now the master cylinder had been leki...

what are your plans for it.

Did he cosider that a Brumby Can take a payload.
If the STD brakes were kept on the Brumby and fitting say an NA EJ20.
For round figures lets say the EJ20 is 50KG heavier than the EA81. Would it be allowed to use the STD brakes and just reduce the payload by 50KG.

The ball is the check valve for the accelerator pump and simply goes down the hole for the pump. I have lost two of those darn balls.

MY Wagon, seam sealered some holes, Fitted a front bumper and fitted UHF from Outback. Beige Brumby. Took it for a drive, Blasted rust from under battery tray and on the chazie under the brake master cyl, Have put primer on it. Outback, Fitted New UHF and antenna, BLING BLING. Red brumby, looked at ...

If you suspect it is flooded.
choke off
full throttle
pull till it fires and starts.


BUT it sounds like you have backed off the butterfly stop to much. Wind it clockwise 1/4 to 1/2 a turn and kick it in the guts.

Steptoe yer pinch power form the rear light, this took the longest for me. run some speaker cable down the roof lining it will go easily. I have the wedge type LED's in the map light and extra LED strip in the L interior light. Hint when you use the clip nut thingeys for the map open the clip up sli...

Yer cool, I am goning there tomorrow to get some bits myself so I will take note of the colour and style for ya.

Neat looking Fiori. Put a motor in the back like Gannons link and it could pass as a Ferrari. Mate list it on Gumtree and it should sell pretty easily. Imagine if it were a 92 Brumby with 170,00ks on it it would have sold within 10 minuets at $1800. All the best with the sale Corax it does look pett...

Well with all the cutting and welding out of the way, I have burn marks on my fore arms and neck from falling spatter and a warm fuzzy from doing the job myself. Blasted some surface rust from a front guard and slapped some paint on to seal it up. re fitted the guard, mud flap headlight surrounds an...

Lashed out and got some of those sports seats that were on special at REPCO for my red Brum.

SB . The interior light out of an L series works great in a MY and screw straight in. The reading lights from the L are very easily adapted to the MY. You just have to cut a rectangle hole in the roof lining and use the clip nuts that come with speakers to screw into. Bantum. as Cam said, what are t...

There is a bloke in Coffs wrecking one, not sure of the trim colour though.
PM me if you want his ph number

Just spotted and checked out a STI fitted out Brumby.
If I had to describe it in one word it would be "PORN"
Lives at Emerald Beach.

Far out !!
Bet you are chuffed with your Brum. Love it !