The AUSubaru.com.au Forums

Again thanks for all the replies. Some really useful input/advice. After reading the replies I think it is probably a timing issue. If I got spark at the plugs the ignition module must be working. I have not checked the flywheel markings. I will check the inlet and exhaust valves at Cylinder 1 when ...

Thanks for all the replies. The engine is on a stand and has been wired up correctly. I am using aero spray in the carb to get it to fire. I have bought a new coil thinking that the old coil was maybe giving a weak spark under compression. I have ordered a new ignition module. Funny thing is I had t...

I have'nt check the valve clearances. Can someone offer some step by step advice on checking the valve clearances on the cylinders ? or what I should look for ?
I have tried moving the distributor while cranking the engine but still won't fire.

Bench testing an EA81 engine had it firing but after a few days tried again but won't fire . I have can verify the following 1) spark at the coil & coil lead 2) spark at the plugs 3) fuel in the carby 4)tdc, disty set correctly #1 cylinder 5)good compression 6)new coil 7)spark leads in correct firin...