The ***ALL NEW*** AUSubaru.com.au Forums

If its from a MPFI would take a good guess at it being the dropping resistor for the injectors.

Me too, I'm up for a set.

I have done a little more searching and have discovered this distributor cap no 22162AA040 also fits 6/86 to 2/89 Suzuki Swift 1.3i 16v and Nissan Terrano 2 Z241. other manufacturers part no's Standard motor products JH180, Airtex/Wells 5D1242, QH XD297, Intermotor 45471, Suzuki 33321-641310, Lucas ...

I have the same engine in my Brumby and have had little luck in finding the correct cap also, purchased one from the UK only to find it was wrong. Unfortunately I don't have a VIN from the donor vehicle to go to Subaru with, so today I purchased a new distributor in the shape of a very bent 2006 Imp...

Well luckily enough Townsville only has a handful of days that go below 20 deg c so you should be like a pig in mud. Right now at 8:20 am it is 29.4 deg c in my dining room.

If the torsion bar centre adjustment doesn't give you enough you can always rotate the torsion bars by a spline this will give you either 70mm or 25mm depending on if you rotate on the outer or inner spline. Explained in Gregory's manual. Download a copy and have a read. I did my Brumby got the resu...