The AUSubaru.com.au Forums

Cool, i will be out there the week before the race checking out the track and then out out at finke for the race.Crewing for bikes 747 and 503.

Going good Danger.
Got to expect a bit of wear after 200K
Hows things ?
Found the nolathane and whiteline part numbers
Shooting out to finke in a week

Most of the bushes in the rear end of my outback are busted. Anyone got links or part numbers,nolathene etc, or suggestions where to grab some. Looks like it's parts 13 ,12 ,9, 18,17 and the diff bushes Cheers Will http://www.subaruoutback.org/forums/attachments/problems-maintenance/18190d1292449455...

Just remembered seeing a gen3 with the tyres you mentioned.It wasn't lifted but it had the guards trimmed

They won't rub on the strut.They will rub on the trim without a lift.
215/70 16 with a 2" lift

Fluids ok in consistency and colour but is due for replacement.

Got a problem with the auto in my 99 outback.Over the last 6 months or so on occasions the the auto will hold gears then slam into the next gear with a loud bang that you can feel through the car.It seems to happen when you are driving slowly for a while.The upshift,from 1st 2nd 3rd feels like the c...

What have you used with your EJ20T in your L series? I have an EA82 MPFI airbox but unsure if the EJ AFM will bolt to it Cheers guys It'll bolt on.I think i had to make a hole a little larger.Also had to cut the L out of the intake hose.This was for a ej22 but the afm setup is similar re turbo. I'l...

I've made one that was fitted on a brumby fit my L .It's just a couple of bolt on brackets easy to fab. A reversal shouldn't be hard , L to brumby should be doable .

Would it be worth putting the 2" lift on top of what's there already? Some components would then sit 1" lower than others which would make it 'consistant' with factory? On my gen 3 OB the standard outback spacers/blocks stay in place and then the 2" alloy blocks were dropped on.No problems with mov...

Auto's are great offroad until they go bang $$$$$$$$$$$$$.
The vtd locked on in 1st rolling down a hill has ok braking.Man i miss my auto offroader.

SHE MUST BE GOING MAD.Price hikes,selling of anything thats not tied down,fines for be a aussie=swearing in qld what next.She has managed to turn most labor supporters against her, must want to get out.

Good luck and go hard guys.

That does look good.Gascoyne would be a good challenge for the brumby.

Well done & congrats Bryan and Bec.

A lib one fits in easy,i guess an impressa is the same.The cable to the box will be a bit long but has enough flex to work no worries.

.If it's bobbing up and down then I'm probably not going fast enough. :lol: Yeah it looked a bit slow in that section. bobbing up and down as in bouncing?? or as driving?? im confused too. Be confused no longer.Imagine a boat in the ocean with a bit of swell.Now imagine a brumby going over woops do...

Looking good Stuart.Just wondering, all this work is it going to ride more like a buggy?Watched the Finke 09 dvd and the little bit of brumby i seen it looked like it was bobbing up and down,normal right .Best of luck with 2010 season.

Been getting into adventure riding,modifying postiebikes and looking for another subaru project.

200000km. She's just baby Danger.