The AUSubaru.com.au Forums

I was noticing trouble starting and seeming duller performance and poorer fuel economy so I removed each ignition lead, scrubbed the metal contact points with some light sandpaper. Huge difference. It now fires up 5 times sooner. :) I now have a little more power going on a bridge from Stockton to ...

The one i got most often was you have more qualifications then i do.

guess who didn't get the job

their is a drawing of the hoses in the manual i down loaded from the jdmfsm site http://jdmfsm.info/Auto/Japan/Subaru/--Old%20Models--/

bunnings are selling them now both the renovator $174 have all the blades as well and the dual blade was $99 on special

i had a read of the books after posting the link must admit it wasn't that helpful at all was hoping it had a work shop manual in their for the foz

could have one at broken hill would give all states a chance to meet

your right about the no help policy, just thinking of the running cost the closest gasweld to me would be like driving from coff's to bonville and passing bunnings and supershit on the way

Bunnings has the gasweld wire in 0.8 gas less as well and i think supercheap has come on board to good to price around some times. the repairs are looking good

alang wrote:http://www.redbook.com.au will give you the dealer and private sale price as well the price from 2001 when new

http://www.redbook.com.au/cars/research ... x=8&eapi=2

http://www.redbook.com.au will give you the dealer and private sale price as well the price from 2001 when new

had a problem with a power pack i purchased from china i couldn't get one in australia fujitsu monitor 24v x 240 well the first one lasted 14 hours and over heated so sent them a email they replaced it didn't want the old one back and is still working fine after 2 months being used 24x7 i don't turn...

Yer Al, where did ya get it ! The axle is the drivers side out of the ute taken it apart all the balls and parts had minimal wear on them had to tap the balls into the holes. i have a spare of a L Wagon but didn't know if making noises had been replace from the car just need to pull it down to see....

Ebay :) http://www.ebay.com.au/sch/i.html?_trkparms=65%253A12%257C66%253A2%257C39%253A1%257C72%253A6422&rt=nc&_nkw=cv+boot+tool&_sticky=1&_trksid=p3286.c0.m14&_sop=15&_sc=1 TOONGA that's the place where i've been buying from but been using the Australian sellers like onlineautoparts and Suzukisuper...

had a go at replacing the boots on a good cv axle today. their was no clicking noise or noises coming from the cv's only the boots had rips in them pulled apart cleaned examined repacked with new grease cost $36 with postage for the boot kits [img][IMG]http://i1242.photobucket.com/albums/gg522/Alan_...

the reason i went with the brumby was back in the 80's when working on the rail we had some contractors using the leone wagons to run down the fire trails and tracks beside the rail line seem to do the job ok just the clowns driving them wrecked them after 4 months driving them through fences and hi...

Used Car Safety Report The Subaru Brumby has been awarded a 1 star Driver Protection rating in the latest Used Car Safety Rating (UCSR) report. UCSR are reported annually by the Monash University Accident Research Centre (MUARC). Ratings are estimated from data on real crashes reported to police in ...

alang wrote:it would be interesting to have ancap crash a brumby just to compare it with the jumbuck

could only find one done on a 1978 brat doin 30mph

http://www.youtube.com/watch?v=TubBoSrAv8A

it would be interesting to have ancap crash a brumby just to compare it with the jumbuck

i used this stuff back in the 80's on my EH Panel Van Porzelack 'O'Wax it gave you up to six months protection if you put it on right and just hose the dirt of and dry it with a chamois "O" WAX This premium product based mainly on pristine and pure CARNAUBA wax can be applied to give a particularly ...