The AUSubaru.com.au Forums

Cheers guys belt is not over tight did spray it with inox but no change, I did drive around 39km today didn't effect temp and stuff. New question will a 90 l series 5 speed fit I don't think its a touring wagon please help.

guys have another quick question, just swapped alt belt as old one was squealing but now the alt is making bad noise ive taken belt off and run brumby without it no noises guessing its a bearing stuffed. im only asking as im house sitting in the bush a good 1 1/2hr from home can i drive it back with...

cheers definatly tranny oil ive already done the oil pump seals about six months ago and its all good, i havent lost any engine oil but gearbox oil is down some. will it hurt if i just top up oil and drive for now until i can get to mechanic..

guys i think i have found the oil leak i believe its between the bell housing and the block, i cleaned under the ute were i thought it was leaking from, ran the ute at idle for over 15 mins not leak, took it for a quick spin got back and oil dripping right behind the oil pan. not engine oil but tran...

ill check things again in the morning just seems wierd to as ive just put a weber on as well

cheers man it must be the head leaking or the only other thing it could be the oil pan. thing is i did rocker cover gaskets the other day and did oil change were it is leaking is real black dirty oil but dip stick is super clean.....

hi guys wondering if use could help me out, i have a rather large oil leak on the brumby i believe its coming from an area ill try explain were as im not that mechanical minded. its the next section of the engine past the valve cover sorry thats about the best i can do, there seems to be a leak ther...

hi guys just a quick question will 15" peugoet wheels fit a none liffted standard brumby

ok so ive put new rotor button on but still not starting. is there anything else stopping it from getting spark

hi guys my brumby stopped going awhile ago i thought it was the ignition moduel. i replaced that but pulled the dizzy out i never marked anything to put it back together so i understand it will be out of timing pretty bad.still wont start i put a new coil in and have noticed the rotor button has a c...

ok cheers guys so does that mean that none of the blocks will fit either

ive got a pic of the lift kit laid out hope it helps

hi guys ive obtained a lift kit from an l series im wanting to put it on my brumby i see the front shock top plate is different is it possible these will fit or forget about the strut lift altogether. any ideas

hi guys heading to sydney for a week tomorrow. just wondering if there are any subie wreckers or shops that would have stuff for my brumby cheers

battery, alt all good did kick over a couple of times but would never rev over 2000 and alot of black smoke sounded like running on one cylinder

hi everyone, was driving the brumby last week heading home it started to coff n splutter alot would stall at intersections. later that day would not start at all its getting plenty of fuel but no spark. i did replace the coil and everything is wired up correctly still no go...... I have read a fair ...

Hi guy im in desperate need of a carby for my 90 brumby, mechanic put a kit through the original and has not helped says i need a new one any suggestions

guys just got prices for 14" sunnies around $85 - $90 per rim is this expensive or about right. Still looking for some second hand ones if anybody has them cheers

Hey guys got a crazy airbrush scene on my brumby the xxxl kiwi i brought the ute off had it done. What do ya think. I reckon some of the boys up north would love it......[ATTACH]3053[/ATTACH]

Cheers boys any info will be awesome