The ***ALL NEW*** AUSubaru.com.au Forums

thanks for your help

know where i can get one?

does anyone know where i can buy plans or a kit for a 4 inch lift for a 1990 brumby?

yea i will have the two sets once the lift and muddies are done, am just lazy and dont wana change them over all the time and its the 3.7 im 99% sure

haha yea was planning on going with the usb/ipod player, was more concerned about what are good speakers/ subs?

how hard is it to change the final drive ratio on a brumby? would like to go to 27 inch tires but its gutless enough already... any suggestions?

sorry for the late reply but think i can shed some light here, tire pulls are very common in the industry, the wheel aligner should have checked that, check your tire pressures and make sure your tire has worn easily, the best way to fix the pull is make an adjustable\ camber/castor kit

dont know much about sound systems but building up a brumby and was wondering what people would reccomend? budget of 500-700 dollars, thanks in advance

Didnt think about cambers, how hard is the ********* kit to fit?

i know this has been asked before but i just wanted everyones opinions on the advantages and disadvantages of both, keeping in mind il be going to a 27" tire, thanks in advance

did you end up buying them? looking at a set for my brumby, wondering how they went?

i have a 1990 brumby with an ea81, it has been running rough since i got it but has recently decided it wont run at all without 3/4 choke, any ideas? thanks in advance

i have a 1990 brumby with a slightly older motor in it (not sure how much older but still an ea81) that is only running on 3 cylinders, it has spark and compression, what else could cause the problem?

could this happen in one day? it had hardly any slop in it and selected every gear fine before?

what are they supposed to look like? (sorry new to this whole mechanicing thing)

got my 1990 brumby about a month ago and took it out bush last weekend, when i went to drive it home from camp the next morning it wouldnt select reverse and all the forward gears had alot of slop in them, the only thing i can see that might have caused the problem is it had a bit of a knock on the ...

Green_eyed_liberty wrote:i have 27" on my brumby, i've had no dramas down low

what about on the road? much power loss? and id like to put an ej 22 in but not real confident on the wiring side of things...

so on a scale of one to ten how difficult is it? keeping in mind i only have a cert 2 in automotive and only gearbox iv ever rebuilt was a little 3 speed... and hilux rims after 6 stud conversion

hopefully in the next fortnight i will be putting a lift 15" rims and 27" tires on my brumby but am concerned that the already very average low range will become next to useless, anyone done diff rations or knows much about them?

ah fair enough well mine seems to be in good condition mechanically except for the extension housing gasket is leaking, anyone know where i can get a new one of these? also thinking i should probably do the tailshaft seal while iv got it out?