The ***ALL NEW*** AUSubaru.com.au Forums

I missed the uneven headers on the bay of dreams :mad: Im going to see this guy with the old legos tomorrow, so hopefully i'll grab headers of some sort there. Im having problems keeping the car running. When i turn the key in the ignition, the fuel pump engages and sends some fuel up the line, and ...

Have you looked around for the factory headers? Tho not many 1.8 Imprezas around. Just got to stick a bolt in the O2 sensor hole. Or just leave it there unplugged and confuse your local Subaru dealer :p There are 2 impreza sports in local breaker that have factory headers. I just fancy the unequal ...

[QUOTsounds =TOONGA;231311]The uneven headers are great and if you still want the skid plate you can put spacers between it and the crossmember sort all fits. Would love to see some video of the engine running TOONGA[/QUOTE] That sounds like the way to go for sure. I will get a video up as soon as I...

Hi guys. got the fuse problem sorted and the engine running this evening:D .Ive not got ej headers yet, so its pretty noisy!!! I have seen some unequal length borla reps for sale online, but its difficult to tell if they would work with the skid plate on the l series. I fancy a bit of suby burble:co...

Thanks guys. ive checked and double checked everything. Im going to try a different starter, as the one on there at the minute came of a grubby old scrap yard impreza that has laid up a while.

not a problem, I forgot about the carby section for the EJ motor on that page as http://ausubaru.com.au/showthread.php?t=7011 Section 2.6 - Carburetor TOONGA Thanks again. Ive got the engine wires sorted now. When I attempt to start the car, its blowing the ignition coil and fuel 15 amp fuse in the...

wagonist wrote:Really, You couldn't trace 5 wires?
It's been 15 years since I had a carb version
but at least 2 are coolant temp & oil pressure

Thanks, and apologies for the poor wire tracing skills

El_Freddo wrote:If you can, do a visual comparison of the wiring in each dizzy to double check that they go to the same place/do the same thing between the two dizzies.

Also check your fuses, you could have blown one for some reason... stranger things have happened!

Cheers

Bennie

Cheers Bennie.

TOONGA wrote:showthread.php?t=7011

EJ 1992 FSM Section 6.1 - Engine Electrical System

compare with

Section 6.1 - Engine Electrical System of the EA 82 FSM in the old section here http://jdmfsm.info/Auto/Japan/Subaru.

For the wiring

TOONGA

Thanks a million:)

Thanks guys. Ive gone with the ej alternator spliced into the l series loom. Im havin good problems getting a spark. The coil is now mounted on the drivers side of the car, opposite to when the ea82 was in there, so ive lengthened the wires for coil and disty to reach. Ive fitted new disty cap, plug...

You will need to one wire on the EJ alternator to ignition on only, otherwise it will always be on and drain the battery. http://ausubaru.com.au/showthread.php?t=14943 http://ausubaru.com.au/showthread.php?t=3385& If you can use the Alternator you have there is a spacer between the pulley and the b...

eventually got my trans back last weekend , so work can continue now. I pulled the clutch and flywheel off last night to replace rear crank seal. Dry as a bone back there , but im taking no chances. Got old seal out handy enough, opened my new one that came in the post, only to find its bent outa sh...

The outlets are the same as ea82 radiator.

Thanks for the transmission advice Bennie. I am having it done by a builder, I might try it myself in the future. Pretty chuffed with the radiator myself, took a few evenings of trawling through ebay looking at all the rads for sale and reading dimensions before I chose this one. It is indeed from a...

I'll get those pics right yet. Heres another of the saab radiator in place. The rubber grommets from the old l series rad fit onto the dowels on the bottom of this rad also. I may be lucky to get one of the original holes for the lower dowels to work, but it won't be difficult to drill two if its ne...

Thanks for the help RSR 555 , but I decided to get a local guy to do the rebuild for me. I can watch him, so it will be a good experience. I just don't want to ruin my 52k mile ea trans, getting another would be impossible here. But im still progressing in other ares of the build. Ive just fitted a ...

I disassembled the ej dual range trans today , and have both bare front casings in the back of my dad's jeep so he can get them steam hosed tomorrow when I'm at work. I think I went about it an awkward way, and would like some advice from someone who has done the reassemble if possible. First off , ...

Also.. very hard to see your pictures.. they are very small (or is it just me?)[/QUOTE]

sorry, I was cropping the pics cos I had trouble uploading full size

The dual range was the original from my 1986 carb l series. It will be handy for axles being a 25 spline. I noticed the axle shafts are thicker than 23 spline items ive seen pics of. I have a new genuine front axle I bought for a non turbo xt. it has the same inner and outer spline count, but a thin...

I removed the ea82 engine and gearbox today. [ATTACH]4362[/ATTACH] Here is the old ea82 unit in the middle, with the ej dual range in front, and the carbed ej18 in the back ground. [ATTACH]4363[/ATTACH] I noticed my ea82 dual range has 25 spline stubs , the same as the ej dual range box I got for th...