Search found 53 matches

by camo85
Sat Dec 19, 2009 1:21 pm
Forum: Suspension - shocks, springs and upgrades
Topic: strut top question
Replies: 10
Views: 7350

strut top

so is the bigger gap between the strut top and the body of the car at the front side or back side of the strut top on brumbies save me undoin my struts to look at strut top cheers cam
by camo85
Sun Nov 29, 2009 9:08 pm
Forum: Sound / Entertainment Systems
Topic: How d0 you mount a stereo in a L series dash
Replies: 69
Views: 24928

clarion

most clarion head decks are slightly shallower and you can bu a 90 degree aerial connection my brumby head deck is flush with the console where the original one finished
by camo85
Sun Nov 29, 2009 9:01 pm
Forum: Trouble Shooting
Topic: steering vibration
Replies: 3
Views: 1320

wheel balance is good plus its vibrates before and after loads but not when towing my thought it maybe bent chasis rail or something which tighten under load but don't know how it could cause vibration
by camo85
Sun Nov 29, 2009 6:52 pm
Forum: Trouble Shooting
Topic: steering vibration
Replies: 3
Views: 1320

steering vibration

has anyone come across this,when i drive on highway 90-105km/hr there is a vibration coming thru the steering but when i tow something boat or trailer the vibration disappears does anyone know wat could cause it.check and replaced wheel bearings,driveshafts
by camo85
Sun Nov 29, 2009 6:44 pm
Forum: Conversions, Modifications and Performance Upgrades
Topic: strengthen chasis rails
Replies: 2
Views: 1185

strengthen chasis rails

has anyone somehow strengthen brumby chasis rail to attach tow hooks or where is the best place to tow brumbys from tow bar bent today and don't like idea of pulling off alloy bull bar dont real strong help would be great
by camo85
Sun Nov 22, 2009 12:07 am
Forum: Engine, Gearbox and Diff
Topic: outback tappet cover gasket
Replies: 8
Views: 2542

thanks for replys how do i tell dohc to sohc can you tell by engine no. ej25DNWDJA
by camo85
Wed Nov 18, 2009 8:46 pm
Forum: Engine, Gearbox and Diff
Topic: outback tappet cover gasket
Replies: 8
Views: 2542

outback tappet cover gasket

does anyone know can the tappet cover gaskets be changed on and subaru outback engine while the motors is still in the car
by camo85
Fri Jul 03, 2009 7:27 pm
Forum: Trouble Shooting
Topic: rebuilding gearbox mounts
Replies: 5
Views: 1567

rebuilding gearbox mounts

has anyone tried rebuilding gearbox mounts using conveyor belt rubber if so what contact glue should i use.
cheers
camo
by camo85
Fri Apr 03, 2009 6:15 am
Forum: Trouble Shooting
Topic: MY Brumby door stuck. Foot print narrowly avoided.
Replies: 4
Views: 1726

try winding the window down and stick a straight piece metal down the door to where the locking mechanism is and push on it while someone pulls the door from the outside sounds like the mechanism has locked on the striker plate direct pressure opening arm can sometimes fix it..
by camo85
Wed Mar 11, 2009 5:55 pm
Forum: Trouble Shooting
Topic: lower control arm bushes
Replies: 10
Views: 3460

lower control arm bushes

hi has anyone replaced the inner lower control arm bushes on (my brumby) are they pressed in and is there a trick to replacing them
cheers
camo
by camo85
Sun Nov 09, 2008 7:38 am
Forum: Engine, Gearbox and Diff
Topic: Headgasket fixer.
Replies: 28
Views: 6986

hi

yeh i used chemiweld on my ea81 i did 50,000km on it until the head gaskets really let got the only down side was sometimes the copper solution got hot enough to cause run on after the key was turned off.
by camo85
Sat Oct 25, 2008 6:17 am
Forum: Brakes, Wheels and Tyres
Topic: wheel adapters
Replies: 1
Views: 1353

wheel adapters

hey do people here think these are safe for off road use or would they bend
just thought its a quick way to change for offroad use


Image
by camo85
Wed Oct 22, 2008 8:18 pm
Forum: Queensland
Topic: EOI -> Cape York Trip 2010
Replies: 149
Views: 45938

gunshot

hey just looking at a few pics of the cape has anyone done the gunshot entry in a suby
by camo85
Sat Oct 04, 2008 3:49 pm
Forum: Engine, Gearbox and Diff
Topic: pto winch
Replies: 1
Views: 1016

pto winch

hey just a question is the rear diff on a brumby the same spline count as the front hubs and same diameter shafts, making pto winch for a tractor
cheers
by camo85
Thu Sep 11, 2008 9:28 pm
Forum: Conversions, Modifications and Performance Upgrades
Topic: winch bar
Replies: 7
Views: 2264

winch bar

anyone here have a winch connected to a brumby/my series if so can can someone post some pics as i'm looking to make one .is chopping the bottom of the guards off below the bar legal in qld

cheers
camo
by camo85
Thu Sep 11, 2008 9:22 pm
Forum: Trouble Shooting
Topic: urgenent help(bullbar)
Replies: 6
Views: 1885

thanks for all the solutions i've fixed using plate with some spot welded nuts.
by camo85
Mon Sep 08, 2008 5:48 pm
Forum: Trouble Shooting
Topic: urgenent help(bullbar)
Replies: 6
Views: 1885

urgenent help(bullbar)

does anyone have any solutions to broken spot welded nuts down the chasis rails were the bullbars connect on brumby the wrap around type bars

cheers
camo
by camo85
Sat Jul 05, 2008 1:28 pm
Forum: Trouble Shooting
Topic: tuning weber
Replies: 10
Views: 5194

a 34 adm doesn't fit a 32/36 it's too big what i found while searching the net is that part no. WEB 43914060B which is a solenoid for an 38/38 dges will fit 32/36 but not manual chokes(i think thats because i gets in the way of the choke setup.
by camo85
Wed Jul 02, 2008 6:33 pm
Forum: Trouble Shooting
Topic: tuning weber
Replies: 10
Views: 5194

tuning weber

trying to tune weber, i've got it to run alright but alittle rich but when i got to turn the car off the weber runs on ,so i backed the mixture off and the idle it shuts down alright but when cold is impossible to start until mixture is increased.(can the butterflys on the carby be not shutting off)...
by camo85
Sun Jun 22, 2008 5:17 pm
Forum: Subaru Chat
Topic: MY/Brumby accelerator cables $$ ??
Replies: 5
Views: 1512

yeh i bought a genuine one of like $38 a couple of months ago

Go to advanced search