The AUSubaru.com.au Forums

Looking for the 4 mounts to fit original cargo blind / cover. Been told they were only on Touring Wagons?

PM sent

Don't know how to post a link. Listed as a universal wiring harness relay kit. Supposedly allows upgrade to 100/90 watt bulbs. The standard 60/55 would probably be kinder to the reflectors and seem plenty bright enough for normal usage.

Finally got fed up with the dim as headlights and fitted a upgrade loom from http://www.onlineautoparts.com.au Cost $18.90 and took 15 minutes to fit. Voltage at the light went from 9.5 to full battery voltage. Much like fitting HID lights as in plug and play fitting. http://ausubaru.com.au/images/s...

Just been down this path with my L series. The rack ends with the female ends are apparently Brumby fitment. Found out that my L had a Brumby rack fitted sometime in the past. Couldn't source the ends to fit so I fitted a proper L series rack. Rebuild parts are readily available for them from Burson...

When I replaced the diff hanger bush I used a long bolt and nut with 2 large washers through the mount and bush. Tighten nut and bush presses into the mount. Used plenty of supplied lube and by the time it had pushed in 20mm the load had gone off the nut/bolt setup. Pushed in the rest with fingers a...

Super Pro bush SPF 3005K is the diff pinion to cross member bush which fits my '91 L series. The steel outer bush is removed and binned. Bit of a drama to push the poly one in but lots firmer than the original when finished. I used a long bolt with large washers ( sort of like press plate setup) Onc...

There is a set of 5 at Beerwah Subaru.

Recently bought a set of rotors and pads for my L-series on e-bay from a mob called westenfarmers. Cost was $100 ish delivered. They are at Eagle Farm in Brisbane but I don't know if they allow collection.

Looking for standard height springs and or struts for my wagon. Got the original springs still and done 445,000 ks.Can collect around Brisbane area.

Cliff R wrote:I forgot how expensive the Helicoils are.
$60 + bucks for the kit, had to buy it though.
Will only need the "refills" next time.

As an option check out Radum.com.au Thread repair kit [RDM-BM94-4060] 5 sizes for $36