The AUSubaru.com.au Forums

What kind of camber adjustment bolts are they in the front crossmember? Have they been removed from the rear of a Impreza or Liberty, or is it a kit you can purchase?

Finally got some tyres taken off, added bare weights in first post.

If anyone else is going to mosey-on down there, please shoot me a PM and I'll ask them to do me a little favour if you they mind too much

...If they are, can you please check and take some photos of the vortex stock...

Ta.

So, what happened, did it get crushed? Are you doing it up? Parting it out?

mrwalker500 wrote:I made coil over mounts for the brumby from a bit of 50mm box. This will let me use l series top mounts with Mazda mx5 shocks and 2.5" lowered springs

Thankyou for not calling them 'Miata' shocks.

RubysueEA82 wrote:So it's labeled D, 3, 2, 1... is that a 4 speed auto?

Yes, 4 speed electronic auto wth lock up TC, very good transmission.

Just pay whatever its worth to you for the parts you want, then part out the rest for your trouble.

The crossmember is valuable because it has the turbo notch BTW.

You got my PMs RE: parts I trust, and Im guessing you got many more, you should have no probs recovering your money.

This sounds really interesting aye!

Did you get it?

Its a locally bought Vortex.
It will have rear discs that will fit the L series, but don't assume it has an LSD, as Vortex's usually don't.
If it's auto it wont have a center diff lock.

I realise this post may be a not so subtle dig at 'vk3fjmh', but I thought it may be worth asking...

Is it for real?

if so, can I please get details on:

-Dash surround
-Digital cluster
-Rear wing

ta

(PM box full - I wonder why!)

Thats an interesting idea Fujifan, I wonder are there any more after market options?
Were the Kmac ones a direct fit, or did you have to fudge the 3 holes?

Steptoe, they are pressed in from the bottom, then what looks like a crimped over cap

Has anyone had prior success replacing the 6203 bearing in the strut top? Seems to be crimped-in...

gone.

top wishbone conversion?
Id like to see photos of those fitted....

Let me know if you want them.

I have a set of vortex rear spats

vk3fjmh wrote:hi its james im still waiting for your reply thanks

The original post does say to PM me for details, but okay, I have PM'd you...

hi can you fond out postage$$ to 3962 The cost of a 3KG satchel, plus whatever you send it in, as per the first post. I haven't heard from or seen a satchel from Schultzie, so if you send me a satchel the parts are yours... If by some chance I end up with two, the parts will be sent to the one rece...