The AUSubaru.com.au Forums

The Haines manual shows a 6 pin trailer plug from 04 to 09. My 06 outback has a 10 pin trailer plug on the wiring loom. It has all the usual stop/tail/blinker connections plus one with 12v all the time, going to the trailer brake and one with no connection to 12v or earth and shown as "Aux" inside t...

There is nothing crazy about the way Subaru have wired their lights. I like your reasoning and the principle is quite sound. The only reason I suggested the wiring was crazy is that some circuits (low and high beam) are negative switched while others (parkers) are positive switched. As an electroni...

The 85 and 86 supplies for the relay should both be taken from the back of the high beam bulb Hi Gannon. I understand what you've done but am at a loss as to the reason behind it, unless it's the crazy wiring system Subi have adopted. I have wired as your circuit and all is well. Since I don't like...

I was gonna try polishing it with gumption Sent from my new touchy phone thingy I have used proprietry cleaners, took hours but a good job, then got smart and used Mothers aluminium polish. Cleaned both lenses in about 5 minutes and the job is just as good as the $20 touch. I just did the wifes 200...

Try this out, I've made the diagram for this specific purpose... Also for my reference ;) Bennie Hi. I've used similar wiring in my 99 o/b and it worked fine. http://ausubaru.com.au/images/smilies/icon_smile.gif The exact same circuit in my 06 o/b works great, BUThttp://www.ausubaru.com.au/images/s...