The ***ALL NEW*** AUSubaru.com.au Forums

I am going back down the EA82T route and have acquired a Wolf3D v4 ecu and I recall a member sharing a tune file years ago. If you have it and wouldn't mind sharing it I would much appreciate it You can PM me and I'll give you my email address My plan is to fit a 4+1 trigger wheel to the cam-wheel s...

A VF28 is a 1999 STI turbo


Is your VF2 water cooled?

Thats a pretty big turbo for an EA82

To finish the EJ20G I just need to engineer it, and from what ive been told, its a fair hassle to get it all engineered, and seeing as its nearly 30, Id like to put it back to original I have a guy who will swap me the motor for an EA82T converted wagon that runs, it also has a digi dash and L serie...

Been a while since ive been on here because of kids, house and work I still have the RX which although I take it to the occasional kahnacross event (which is an abosolute blast, plus I now have a CAMS liscence) is still unregistered and collecting rust. Ive been thinking of returning it to its origi...

The braked towing is 700, or 750kg (i cant remember now), exceed that and you are breaking the law. If you have an accident and damage property or injure/kill someone, you are criminally responsible.

Borrow a larger car like a falcon, commodore or a 4wd.

Redbook says L series has a braked towing capacity of 700 kgs, doesnt have towing data for a MY

Yeah should have clarified, I was referring to the MPT auto. The front drive is always 100% connected to the transmission, just the rear transfer that is variable Turbo and H6 autos had VTD that was a planetarty 40/60 ( 41/59 in later models) split when open and variable up to 50/50 lock controlled ...

Yeah the 4 speed auto from both the Vortex and Liberty has 100% drive to the front wheels, and an electronically controlled hydraulic clutch to vary the torque sent to the rear wheels.

Just plug it off. Car will run fine without it

Heater core is the biggest pain that im not looking forward to pulling the dash apart to fix it.
Readjusted the bonnet catch today so thats one job down

Its on the road, I've been driving it since last Sunday afternoon

El_Freddo wrote: For some reason I thought it was a wagon ??

Ive always preferred wagons for the practicality, but this sedan came along and I couldnt say no

timmo wrote:Whats the fix for the info display?

Remove it and resolder any dry joints on the circuit board. Resistors 1, 2, 3, and 4 are the main culprits

There are a few things that need fixing up... I kinda bought a lemon but at least it was cheap There are bubbles in the header tank even though the car doesnt seem to use any water The heater core has a leak and it currently bypassed There is a dent/big painless rust patch on the bottom of the passe...

I dont know much about it, but why are you worried about them retaining your data or the data from this site? 99.99% of the data will be of no interest to them, but if the data collected helps prosecute people who are dealing child porn or plotting a terrorist attack, I dont see the issue. If you ar...

Green_eyed_liberty wrote:dont you dare.

I wasnt being serious.

Nice car btw

Cos its twin scroll? I actually haven't driven at more than idle speed and all I could hear was the rattle of the big end.
Maybe I could un-even the twin scroll headers to bring back the boxer rumble.

Sent from my GT-I9100 using Forum Fiend v1.3.3.

Like I didnt have enough already, but this came along cheap because of the big end knock, so I sold the Outback, bought replacement motor and got to work https://lh6.googleusercontent.com/-1VSVV4rMqVU/VQ9Ex9S46iI/AAAAAAAAQGk/rNJSJ5oyPTE/w727-h545-no/20150322_165648.jpg 4 The new motor is sitting in ...

I think its just the key and immobiliser module that need to match, I pretty sure the ECU should be right.

You will find that there are about 3 - 6 wires that wont connect to anything, sometimes there are wires that are come out of the ecu plugs that arent even in the wiring diagrams/pin outs.

Have you tried pdftown.com?

I just tried and the site isnt responding.

There is a good chance that a 2005 or 2006 Forester might share a very similar ECU

What is the reason you are seeking a wiring diagram?