The ***ALL NEW*** AUSubaru.com.au Forums

I have had excelent results with cargo seal up, yes the same stuff ALex had trouble with.
I dont drain it out after the 30 mins.it dosent effect the radiator or the water galleries.
Cheers Pete

Hi
This company sells it as a replacement for camaros etc they do fit
http://www.jcwhitney.com/quarter-window ... 08656.jcwx

Cheers Pete

I have done this myself numerous times, it workes well. I made a core cleaning rod out or the wrap around stay that holds the radiator in place in the middle. I ground it down to fit. the stay will reach the full width of the core. I modified a pair of small wire crimpers by reshaping one blade as a...

The guy was a P plater. and the victim was taken away in a Ambo.
The act is classed as attempted murder and also leaving the scene of a crime, and failing to render assistance at a accident, the list goes on. He going to jail regardless.

My son watched a hit and run today. The owner of a L series wagon ran over a man in the car park of a shopping center, he had parked in a disabled bay. This stopped a disabled couple from using it. He was asked to move so he told them to ...off then drove out of the car park then charged back and ra...

Go on Jules drive the Jet car straight head and show them the "James bond gear you had installed.
Cheers Pete

welcome back Mike.
Glad your wife and the little tax deduction are doing well.
Cheers Pete

Thanks guys xxxx
I can stand 15 feet from the car and hear the pump working over the engine noise lol.
Thanks Paul, the motor is a vast improvement on the old one.
It pings at the upper end of the rev range
but it could be the pump pressure dropping out at the upper end causing the ping.
Cheers Pete

Hi Gang.
The fuel pump in my vortex is crappy.
Is the turbo vl commodore pump a replacement or what else is used?.
Cheers Pete

I went to the parts place and while im still trying to get a match i used a 25 amp fuse and a fuse bridge so i could run the car. the fuse blew as soon as i started it but the car still runs untill you turn it off , then you replace it to restart lol.

Thanks guys.
Thats helpful i appreciate the answers. I got the replacement motor in my vortex
(thanks Paul RSR ).Its running and tuned in but i can bbq a rack of beef on the wrong rated link i had to put in to finish the job lol.
Cheers Pete

Hi Gang
Im chasing a black fusible link for a l series.
Also im looking for some secondhand 205/ 60 to 70 /15 tyres for my outback.
Cheers Pete

If you have no luck then i have a 89 you can have for the cost of postage.

Thanks Paul.
But we got lucky today.
We got the bloody manifold off today with brute force and danglely bits lol.
The motor went in 2 hours later and now its bolting everything back on and see what happens.
Cheers Pete

Hi Johnny.
Yes a good locksmith will be able to cut you a new key just take the lock barrel to them.
Cheers Pete

Hi Gang Im chasing a 85/ 86 injected manifold for my vortex. We were doing a engine build and change using a later model 4 plug engine. We got the later manifold off which was interesting due to the old rusted third manifold bolt on one end. We had to use a jack and a long bar to remove the manifold...

http://www.ebay.com.au/itm/Subaru-Leone ... 27c23c101a
The seller is a wanker. He tried to sell it to me , kept changing the price. I wouldnt recomend anyone going near the car.

Congrats mate, be careful and safe.
Cheers Pete

I once got a snapped bolt out of a coma whore by welding a bolt to the remains with a arc welder. the welding super heated the bolt and loosened it enough to remove.
I used a eazy out on a cast iron race head bloody thing snapped off and i had to bin the head.
Cheers Pete

Rover V8 is a great conversion. I have been in one years ago.Yep goes like a shower of shit. It was a relatively simple conversion . The motor bolted up to the gearbox but they had to change the input shaft on the gearbox. The only real problem were the 13 inch rims. there wasnt the higher top end d...