The ***ALL NEW*** AUSubaru.com.au Forums

Slightly off topic here:
What models can you get the engine and gearbox out of? Is it only Liberty's? Is it only 90 to 94 models? And how do you tell if its a D/R, just say if I couldn't look at the car myself, how do I find out through the seller?
Thanks for your help guys.

I don't like Skylines, never liked the look or sound of them. But this ones got a much nicer look. Can't wait to see the ricers stuff up the looks on this one!
I think they have done a OK job with it. At least I like the look now.

So the whole inner CV joint off a older Lib with fit onto the shafts of a Brumby. I thought they used different splines, or is it because the early Libs used 3.9 rear diffs they also used 23 spline front shafts?

So do the inner CV balljoints out of a brumby fit in the EJ boxes inner CV cups?

what would a mid 90's EJ20 motor with everything to run it be worth? It doesn't have a turbo, so it is a SOHC.
Thanks.

Its called a Baja. Is the USA the only country that gets the Baja?

Theres been a thred on USMB about snorkles and peoples ideas and pics. Its called the Ultimate Snorkle Thred or something. Theres some pertty good looking, and some bad looking ideas there. But these someone in aus that makes them? Sounds good, I'll have to see a pic of one. Just remember if you mod...

wrx_nut, what I had to do is right click on the little image thing then go properties then copy the location of the image then paste it in a new window addres bar.
Thats how I got it to work anyhow.

Brett, is that the Kumho venture M/T for $125! i got quoted $188 for them a week ago! 8O Great tyres. I got a set. Works wonders. Look awesome too. Cos of being so hard compound they make it a little fun onroad in weather....... But I've gone over 2000km on the now and only 1.5mm to 2mm wear on the...

and yeah dip stick tube is the only way to fill it back up. Gotta wonder what the subie designers were on when they made that.......... It seems all but hard to put a cap on the trans. On my 4 speed D/R there was a bolt right behind where the front diff is(?) And I filled it with a carboard funnel ...

I can't. When I put my engine back in a few nights ago I somehow popped one of my inner CV's out of its socket while jacking the gearbox. So I had to take the wheel off and axle out to put a engine in. :( But I think to take it out I'd need to jack my 2" lifted rig up a little, just dont see every t...

If anything I find USMB very helpful. You say there’s a lot of "D/heads", and "Too many yanks", and you say the people are negative. If anything the people on USMB are no worse then the people here (just read what these people here are saying about USMB and think for a bit)... I find here you get a ...

When I get my MT4 brumby box stuck in 4WD I normally get the car up or above 40kmph and then put my foot on the clutch and push the lever, but maybe I haven't had it stuck bad yet. The speed seems to help mine alot! So you have a auto trans right? Maybe theres something up with the button or wiring....

If it was white it would look a lot less ricerish. May I ask, what do you think of the scoop? Build quilty, design, the mesh? Any good?
Maybe paint the whole hood black? 8O

No mudrat, See where it says "The link" its a link, click it!

Although those wheels look sweet. And the ute is very clean, 9 outta 10!

Subaru wrote:(if you don't want fellow Subaru freaks bidding against you!)

I'm not as stupid as I appear. And I don't lie.

just a quick chop here. http://webmaster.beverleypaine.com/subaru/brat_duelcab_l_series.jpg Just thought you may like to see this, took about 20mins to do, but I got time :D Its a Brumby with L series doors, I couldn't find a MY sedan so I just used a L series instead. Its all the same anyhow right?...

Has anyone seen those alloy wheels on ebay? I was interested, until I saw they were in Vic.

The link <----- click there!

Is it alright to post about items on ebay here? Just thought I might ask for future reference.

I'd just use some RTV silicone. Always works in those sortsa places.
......
But I do have a few problems with oil leaks on my ea81 ! 8O

I'm interested in getting some SUB4 rocker covers. I've had a lot of problems with the ones the EA81 comes with. Just wondering if there is any where in South Australia or some where that can post cheap-ish to SA? Any one here know? Thanks

Thanks for the reply. I think the EJ is the way to go for me then... Time to save up.