The ***ALL NEW*** AUSubaru.com.au Forums

and would allow us uni kids to have good think about coming.. wouldn't mind having a look at a few south coast surf spots

during the drug aware pro legal camping facilities include anywhere you can sleep in your car and not get caught.. hopefully they get some swell agin this year last year was nuts, but yeh if your going to camp illegally make sure your not near anywhere that is remotely accessable as they apparently ...

my dad's been getting into me about getting rid of all the stuff i have left over from mine and nic's conversions so i'll chuck them up here make me an offer and it'll pretty much be yours.. tacho leone/l-series dash liberty suspension, air and spring white liberty mirror ej22 headers--on hold ea82 ...

yeh it's still 98 octane but from caltex, sounds outlandish but she just hates that fuel company by the looks of things

so i'm starting to think that bp and shell provide higher grade fuels.... story goes, basically the engine in my car is an early jdm therefore i believe its tuned for higher octane so i run 98 in it which is fine if i fill up with bp ultimate or shell v-power but if i run low on fuel near a competit...

hid low beam is almost equivalent to halogen high beam if they're not adjusted right you wont make any friends while driving at night.

exactly what i was considering doing.. what thickness sheeting did you use? eagerly awaited finished pics

Gannon wrote:If you dont have a pill you, the compressor line is able to deliver more air than the solenoid can bleed off, thus limiting you to wastegate pressure. The ECU has no way of knowing if the pill is there or not

i didn't mean sense it's missing directly but instead by the effects of it missing

5 lbs is waste pressure meaning the ecu is probably detecting the missing restrictor pill or a vacuum leak and running in "limp" mode. the pills are 4.40 from subaru.. check the lines are connected the right way and not leaking.. the fact you make more on a bleed-valve would imply ecu boost cut to m...

i'll remove and re-assemble the engine with some guidance but have to get the actual block work done by pros, if bore is damaged or wrong size and with the stroke being different between the 20g and later model then this must be compensated in piston size to retain 2l capacity so machining would be ...

whats a good estimate to have a the internals of a closed deck ej20g replaced (just labour) considering the swap to some later wrx heads....

cheers

if i can get a few things sortd il come down either in the afternoon or the morning

as long as it isn't bundy rum ahah, that stuff is horrible... i work in a pretty up market bar in the cbd and you should see the utter frustration on peoples faces when they're informed we dont selll bundy... does anyone actually enjoy the taste of it?

i was told by a cv guy that cv's tend to let go after lifting due to changing the angle they're used to running in and that once you've lifted a car alot they'll let go but once you replace them with new ones that will run at the same angles from new you wont have as much of an issue.... not sure if...

some rig... cars ok aswell.

i've pretty much finished my engine conversion into my liberty and was wondering as to what is involved into getting it licensed with the engine for insurance purposes.. i understand as the liberty came with the ej20g factory option (rs wagons) this will work in my favour negating the need for an en...

i think they mount differently at the bottom (could be wrong) nothing a drill couldn't fix i dont think and you'll have a few outlets to block... but i'd say just look into an aftermarket radiator possibly dual core?

so i've been driving her round a little bit now and have an issue with the battery/alternator i can get a few starts out of a charged battery and thats it.. i have a turbo timer installed which gives the charge and it varies from 12-13.. which seems slightly low or am i wrong?

i called them asking for two rear trailing arm brackets last week and they wanted 250 for the pair... think it was more of a "cant be bothered" price, especially considering they're 80 from subaru..

http://www.youtube.com/watch?v=cGOsV2Vk ... 2MUkr4EBcf

hahaha thought i might share this for peoples viewing enjoyment.