The ***ALL NEW*** AUSubaru.com.au Forums

Just eye balled my 91 brumby, quad headlights, drivers side outer headlamp, Red/Black is the wire you want to make the spot light relay come on when high beam is lit up. That is what mine is connected to and works very well.

Regards, Peter.

Well after some agonising over what to use and a need to fill that jagged hole, I stumbled across a common sink strainer, these are slip line and made of stainless and happen to be a perfect size fro my hole http://users.on.net/pedroj/cars/buddy/buddy-tray-plug-1.JPG after a bit of trimming up I end...

I think so Dave,
the tyres are about $120 each new I think and the freight would kill you unless you have a friendly tuck driver that needs some ballast

Hi, I have four near new NanKang 205/75/14 tires for sale, they still have the blue protector layer on the white lettering, probably less than 2,500 KM on them. (fitted by previous owner) A photo can be seen here http://www.users.on.net/~pedroj/cars/buddy/index.html For the purposes I use my brumby ...

Hi, I know this is a common theme for Brumby owners as 3 out of the four I have had suffer from it. At the front of the tray in dead centre (between the two drains) there will be or will be sooner or later be a rust spot that if left un checked will end up looking like this one. http://users.on.net/...

need need and more need Two Kelpie dogs did not fit well into a sedan, 10 acres of slippery paddocks to spray, fences to maintain so a Brumby was the natural choice. Being in the Barossa, the Brumby was narrow enough to fit between the rows of vines so they were very popular with the wine industry u...

Thanks JP147, the carb on mine (original) is hopeless at the moment run very rich (lucky to get 300km from a tank of premium) just waiting for some pay days to save up some money to look into it further.
Peter.

Hi, can I ask how you get on with the increased gearing using the bigger tyres? I have some 205/75/14's on my brumby (fitted by previous owner) and when I was down the back paddock last night getting sticks for kindling, tried to backup a small slope to turn around and it simply would not do it, had...

Hi Steptoe, from your experience how much clearance is there between the body and the new L series gearbox? also what did you do about CV's to connect it back up as I believe the spline count is different? I have had 4 brumby's now and each time I go through the process of thinking about a 5 speed g...

Well its been a while since I last looked at the camber but today decided to make a measurement seeing the brumby was sitting on a concrete floor for once. Out with the builders square (600 x 300mm) and sat it next to the front left tyre. At 600mm to the top of the tyre, the edge sitting against the...

I have KYB 333227 on my 1991 Brumby, they do not appear to be more than a few months old so some one must still sell them.

Well Henpecked, you nailed that one, even the strut spacer has the same not quite finished arrow in the top. Looks like it was done with a grinder before the coating was applied. So my kit is from QLD, that's handy to know. No front on photo on the camera, too busy taking other shots, will post one ...

Hello, I bought a 91 brumby back in July, it had a very new lift kit in it but so far have not been able to ID where it was bought from or indeed who made it. Al the components have a gold anodised finish, including the strut tower spacers. The brumby has a quite marked positive camber but the tower...

Be careful of the link that TOONGA sent you GAZZA01, that seller on ebay does not have any of the post 1985 locks for Brumby (already asked them some months ago) Subaru spare parts will sell you a new ignition lock and keys, I bought one for a previous 89 Brumby and it was a true joy to not have to ...

dfoyl wrote:Some additional photos would help your Gumtree listing - interior shot and tray in particular.

Waiting for some decent sun light to not make them too gloomy.. will be there by weekend,

Peter

Item. 1991 Subaru Brumby ute with 2" lift kit Description. 1991 Subaru Brumby ute with 2" lift kit, 205 / 75 /14 NanKang semi-offroad tyre, ali bull bar and a standard towbar, comes with two complete sets of spare tyre and wheels, tonneau cover (in great condition) Condition. For it's age it is good...

Wooster,
with the lever fully down you have two wheel drive, first click up is 4WD High, next notch is NEUTRAL and fully pulled up it is 4WD LO.

did look for an image from google but not found a clear one yet.
Peter.

Hi Steptoe Yes this is the outer lights (high/Low) on my 91 Brumby, the inner lights have two prongs only and are powered only for Hi beam. (looking at a HID conversion from ebay for these) well ..I'll be ..... !! This is the outer light with high and low beam - no changes to the inner high beam onl...

for anyone else that stumbles across this, here is a graphic of what was done to go from sealed beams to H4 globes.

Well I found my answer in that the connections for a H4 globe and a Sealed beam are different. This stopped me in my tracks as I am sure I did this exact mod to my 89 brumby (quad lights) and did not change wiring loom. Any way, you pull apart the 3 pin connector on the back of each outer headlight ...