The ***ALL NEW*** AUSubaru.com.au Forums

Hi Mate They remind me of the sti lights i saw on one of the xt cars at XT.net. It should look cool. Ive been wondering how hard it would be to produce a copy of my dash facia out of fiberglass or plastic. Making a mold from plaster or silicone so its reusable. Cheers Pete

Hi Gang.
Heres a site for wiring problems and queries
http://www.the12volt.com/installbay/default.asp
Free to join and could be helpful .
Cheers Pete

Hi Mate . Nice job on the dash mat, that came up a real treat 8) . The Vortex is looking great. I like the valve caps there a nice touch. All this reminds me that i need to pull my finger out and get started on the rebuid of my Vortex. Cheers Pete

There is another way . Take the T bar shifter off and then click it to the park position then re rout the reverse wires or what ever else you need . take the shifter unit and stuff it in the console or hide it somewhere out of the way. It solves trying to fuss around with the wiring. Cheers Pete

Well it aint good 8O 8O

Hi Mate Try changing the coolant for a stronger one like 90 grade. Wire up the fans with a remote switch , but makw sure that there wired on the ignition side so they dont run when the cars turned off. A large oil cooler would help. The thermostat of choice is as low a temp as you can get rememberin...

The check is still trying to clear 30days later and the buyer sent the cops on the tosser as he was phone stalking the buyer... the thread is 54.000 hits and growing

Hey its taken all day but i got to the end of Charlie Wensel .
What a tosser lol .
Yes i know that to sit here all day means i dont have a life
But i had to see it out ..its like a bad movie.....

Hi Mate
The paint will be fine, i used some on my engine in my mini cooper.
It lasted years and didnt discolour at all.
The car is going to look great when your finished
Cheers Pete

Hi mate
Whats the story if you want to donate money to help towards the running costs of the site.
Im sure that there are quite a few of us that would put something toward the cause if we had the realivent info to do it with.
Cheers Pete

Glad your back on the road ...
The mags look cool on the Lib...

Karma the vengefull elephant was good to you today

We havent had any real bad times but were as careful as you can be.
We dont do business with newbies,if it sounds too good then its not,
check all feed back for hidden truths.
Cheers Pete

Hi Mate With engine off, you need to disconnect the TPS connector located at the throttle body.Measure and record resistance between terminals 2 and 3 with throttle fully closed.Measure and record resistance between terminals 2 and 4 with throttle fully closed , then with throttle fully open terms 2...

Me as well, i found the old one better

Hey my wife says no man should be allowed to enjoy himself past 3 min

Hi Mate. Theres a big screw with a spring on the base of the carby facing the radiator.Turn this one half turn to the left. theres a small screw with a spring on your accelerator cable turn this to the right untill the engine idle increases slightly. That will help untill you can get it tuned. Cheer...

I looked into it a while back when they first came out. Theres a thread on http://www.xt6.net about flow directions and theorys in air and fluids that makes interesting reading. By causing the air to swirl you add energy and unifority to the mix. The principle is sound i cant say if the aplication i...

I can second that perth has a good windscreen service
i had to use it quite a bit lately
Thanks a again Mike your a star mate

I had a fair amount of post and dealings with them. I found that as with all of these types of forums, most are fine and you get a small amount of complete D/heads that post alot but have no content. But on a whole the site is helpful and people nice. :) :) If you want a site full of tossers try the...