The ***ALL NEW*** AUSubaru.com.au Forums

Contacted the seller who confirmed via their records that the cable will fit so bought one tonight. See how it goes when it gets here.

I thought they would be the same.

This is the one I am looking at.

Still not sure what the differences are with the part numbers.

http://www.ebay.com.au/itm/GENUINE-Suba ... xyn~pR1mfN

I am looking to replace the original MY wagon accelerator cable. I found one on ebay with the following description GENUINE Subaru Brumby Accelerator Cable 737065231 NEW $59.95 isn't bad but will this fit any MY or was there something special about the Brumby. Any info on the right part number if th...

Went for extreme measures. Felt the problem roller had "grown" in height rather than swollen on it ID. Sprayed White lithium lube on the roller, pushed a 1" AF socket over the pulley and spun the pulley with a 1/2" driver (cordless impact gun). The heat generated from the friction was enough to warm...

Pulled the drivers window out of the MY wagon on the weekend (powdered windows) and there are 3 x rollers in the winding mechanism and 2 x rollers on the window guide. Non of them were actually rolling or had any hope of rolling. I am guessing that since they are round they are supposed to actually ...

Just bought and put this into the 82 MY Wagon. http://www.ebay.com.au/itm/112150058768?_trksid=p2060353.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT Not a direct fit but only in that the main top bolt needed to be 5 to 10mm longer and the spacer that is part of the top bolt/mount had to go in a couple ...

Went to take the MY for a drive and noticed tell tale CV grease on the front driver side firewall. Didn't have a new boxed set of boots so pulled new boots of a front drive shaft I had pulled part and refitted new boots to not too long ago. This shaft clicked straight away so it was pulled back out ...

Now I just have to sort out the mess I created with the fitting of the new alternator.
Long story, will document this when time and patience permits.

dfoyl What is this carby off ? I don't see it as looking like mine (1982 EA81) Following is the course of action I have taken with my solenoid which has bought me some time. Firstly, I cleaned up the end of my solenoid to expose as much of the wire as possible. http://ausubaru.com.au/picture.php?alb...

I have done this before too but if for some reason the car wants to run on (lots of reasons for this) you have to basically stall it to make it stop.
I will get to the bottom of this just dont know how yet.

dfoyl
Would you like a photo of the solenoid or the carby ?
Please don't toss the carby yet, is it a manual choke model ?

The wire on my EA81 carby (Hitachi ?) anti run on solenoid has finally given up and broken off about 3mm from right down inside the solenoid.
I hope to be able to get one more go at soldering the wire back on but this may or may not work.
Any idea on where to get a new one ?

Anyone know what sort of rims these are, may be 14's.
Love the bloke on the front end trying to bring it back down to earth.

https://www.youtube.com/watch?v=f_HmD-a0xIg

82 Subaru Leone Touringwagon Leather Version

An import I guess.
My 82 Touring wagon doesn't have the headlight washers, electric mirrors, joystick fader for the stereo and the instrument cluster is different (of course no leather either).

https://www.youtube.com/watch?v=r34chfsNeIM

I am not in SA either but life does take over and things go in cycles. I check in from time to time as a lot of people do. In reading these posts I realise I haven't had my wagon out for about 3 weeks so if anything is achieved from reading this is I will get it started and out over the weekend. I t...

This is the brand I am looking for. Metrit I have had the right universal bonnet stone guard on an 85 model series 3 Nissan Bluebird back in the 80's and the same was on my MY when I first bought it. Not finding much on the web though and this one while being the right brand is too short. http://www...

http://haigh.com.au/protective-plastics?view=protectiveplastics ?? These guys have been around awhile Thanks Andy but that's not the company I am thinking of. Found my old set of MY headlight covers but they are original Subaru covers (P/N SA169) so this is a dead end. I keep thinking of a company ...

I have these original headlight covers too for the MY.
Trying to find them myself, they may have a name on them.
Just cant find them

I am racking my brain to remember the manufacturer of plastics like bonnet and headlight protectors from the 80's. I seem to recall their symbol was 2 black flags back to back sitting at an angle. Anyone remember their name, it wasn't Aunger, trying to recall as I think this was the mob who made the...

Looks good mate. Now to get stuck into all that prep work! Cheers Bennie Thanks Bennie I am resisting the urge to take to the newly painted section with cutting compound. Have to use will power for at least a week (especially in this weather), it needs to harden properly. If it polishes up well eve...