The ***ALL NEW*** AUSubaru.com.au Forums

I wish, standard EA81 with Webber.

Rattle gun is 18v Lithium battery. Model BIW180

So on to the front, same arrangement, jack under the engine crossmember, stands in place. First undo the rod from the firewall to the engine (under the spare wheel). Front struts proved a bit of a challenge the first time. Firstly, you are removing the suspension unit, not just the struts. That incl...

Why didn't these take off in Australia ?

Since I fitted a new Webber to the standard EA81 I've had no end of issues trying to get the idle right. Now it is perfect without the A/C off but when that is turned on and acceleration applied, it idles really fast (does 60kph in 4th with no acceleration). Turn A/C off and it slows right down agai...

I've recently done it, search for "Brumby Lift kit first time" where I've posted step by step instructions plus a few tip and gotchas.

Interested, PM sent.

Yep 41 it is for mine

As Toonga says, that's all you need then a whole range of wheels will fit. I have an Autotechnica on my Brumby.

I'm after a PS setup for my Brumby, any chance ?

It definitely happened under load but I'm not sure if it was when coasting. I'd have to drive it again to check. Sorry I don't have more definite details - it caught me off guard yesterday and I didn't really get much chance to mess about with it. Cheers David After I fitted lift, had a nasty knock...

Been through a similar exercise, heart breaking. Still an amazing story all recorded so look on the bright side I suppose.

I've just upgraded. These are in great condition and just balanced too.

http://cgi.ebay.com.au/ws/eBayISAPI.dll ... :MESELX:IT

So having gone through this for the first time, I promised to post my experience so that other newbies could benefit. I bought the kit from Jeff @ Crossbred and on opening the box found the instructions consisted of a picture of the components. I went into instant meltdown and started posting variou...

still got most parts from l series. fuel tank $30 good condition all doors good nick $20 each silvery blue colour complete rear cutoff diff/axle drum to drum with struts $45 gearbox duel range $75 air con factory air still installed in front cut you get the whole front cut with reasonable dash pad ...

skrewd wrote:hey mate how far from kewdale are ya.??

I can get them to Kewdale, no problem.

So here are the vitals.

Each tyre is 685 x 685 (27") x 210 x 13.5Kg. So a stack of 4 will be 685 x 685 x 840 x 54Kg

ok will do it tomorrow if thats not to late, how much would you think they'd weigh.?? That's a good question. I'm taking them in tomorrow to swap over then I can weigh them and also give the cubic dimensions (I think they are the 2 things the transport people need). No hurry at this stage, I won't ...

Talk to Jeff @ Crossbred.

Can you do some homework and find out who would do that and how much it's going to cost you ?

Cheers