The ***ALL NEW*** AUSubaru.com.au Forums

Don't like it, you'd probaly lose out on the advantage of being a lightweight and not gain anything in return, ie using stock suspension... probly only gaining real low range it he's using another transfer case...

brumbyrunner wrote: What's the motor and drivetrain?

wrx driveline is what his profile says...

vincentvega wrote:we are about to install a water tank in that spot in my mates car

Hope the tanks got baffles in it...

I can get full lock driving around in circles with out rubbing, haven't tested it with full suspension travel. front outer guards haven't been cut yet.They're 30x9.50x15... Od's around 29 inch. I'll take a big hammer when i go 4wd make sure theres no probs... Clearance under the sump guard'saround 3...

Who said 30's wouldn't fit? http://www.ausubaru.com/coppermine/albums/userpics/normal_wheels_1.jpg http://www.ausubaru.com/coppermine/albums/userpics/normal_wheels2.jpg Just took a bit of inner guard massaging, just gotta get the angle grinder on the outer guards front and rear then its all good... ...

Just found this website, lots of information on how to do stuff, specs and part numbers... It's a us site so there may be differences.

http://www.northursalia.com/

Do you have any pics of the twin bov bypass system?

Cam

Yep late 98 impreza, factory ecu, supercharger.

What does map sensed mean?

Just cleaning up the brumby's motor i just realised that there's no maf sensor on the intake or in the throttle body itself... Is there going to be any problem with pushing air into the motor (blower) without it running lean or too rich? if so any easy fix?

How much were you wanting for that waic matt?, if blackmale doesn't want it...

I have to say it looks bigger/better in real life than in the pics, doesn't do it justice...

the original bracket i made up was too hard to work with so i ditched it for a better design, just gotta find a new clutch for the charger then it'll run, anyone got an old sigma lying around? Their a/c units have the same clutch i need apparently... Also need a bonnet scoop for the tmic... I'll try...

Don't quote me but i think i spied a gen1 bullbar @ 'a parts' in malaga...

June 19 - Kwinana to Re-open The long-awaited decision on the fate of the Thomas Rd Medina (Kwinana) Off Road Vehicle Area has been handed down. RTRA was advised in a letter from the Government's Off Road Vehicle Advisory Committee that the temporary closure will lapse on June 30 - meaning that thi...

Cbc was around 70 or 80 bucks a corner, seals and all...

how much did the front wheels move forward, i can sense some larger than 27's being able to fit in there now...

seagull wrote:were did you get the super charger from Cam ?

Privately from the quokka...

Dieseling caused by build up in the heads, check the anti dieseling soleloid is still attached/working, sholud be on the side of the carby, cuts the fuel of when the ignition key is off...

still need details on stroker crank, ie where from, who made it etc...

I think subarino's bracketing is a better setup, but i wasn't keen on running the belt past the power steering etc, this way i'm just using the crank pulley running directly to it which used to power the air con... Looking for a new (standard) pulley for the charger as the one i bought is missing th...