The ***ALL NEW*** AUSubaru.com.au Forums

El_Freddo wrote:That unit is now living in SA with one of the old members on here. Seems to go well offroad.

Cheers

Bennie

Seen this in the flesh... in his shed. Hilux Surf chassis and a commodore V6, sounds awesome and is very tall!

Cheers Cam

Going to have to dig mine out, i've got some good ones.
Not that I should have to dig too hard doing year 12 this year

SuperPro Polyurethane bushes (Dark Blue) This is a list of all the bushes and Superpro part numbers you need to give your Brumby, or MY wagon/ sedan new Superpro Polyurethane bushes. This took some time to compile and buy as the catalog is next to useless. I have given the measurements ( Shaft size...

My new RS Liberty rally car has an EJ20G and HKS Turbo. The guy who installed it put a digital aftermarket Temp gauge in. The sensor is installed in the top radiator hose, you cut about 2" out of it and slip the hose over each end, with hose clamps of course and it's all good. Now for this pinging A...

Shaved heads, then get the new specs sent off to the cam grinder for the perfect cam grind

Cheers Cam

I have a complete (in 2-3 bits) EA81 Carby with a good plastic float.

Cheers Cam

Thanks Proton mouse Think I might find the motivation to fix these problems... And all the others hahaha After getting it on the road after the rebuild and fixing a few things i've treated it like a landcruiser (She'll be right, leave it a bit longer) Slowly getting motivation back. As long as it do...

Old school LPG tuning says no more than total advance of 28 DBTDC for sixes and eghts at least. 40 sounds like a beer too many somewhere.... Not sure what he had it at but it wasn't much more than standard. The 40 came from someone who had thoroughly tested the RB30 with LPG and said 40 was as far ...

When Mudking91 had his r31 he was running on dedicated gas which meant he could advance the timing massively. It is suggested that he could go as far as 40 degrees BTDC

Cheers Cam

Bugger! Sounds like something i might be able to put up with.
Just had the fan out small PITA and didn't check the motor
Hmm at least i know how to fix these problems... Now to see if i can be bothered. Haha
Thanks

Cheers Cam

So how is everyone's Subaru's treating them? Just woke up from hibernation and am back for now. (Life gets pretty busy and sadly year 12 will take priority over the forum :( ) Anyway Bianca is running great and the other day i finally got off my arse and put the A/C back in. It's nice and cold, engi...

Welcome p1ayer, Yes very good info on here, and some even better people! Great to hear you have a Subie as a group project car. I have just done the same :) If you ever get the opportunity i would encourage you to meet some people from here if they let you. Bennie, tweety, frog (genuine parts guy in...

Cam came out of HSCibernation? I hope!!! Year 11 has really taken a toll on me, too much work, not enough free time. I need to make a new thread some time updating EVERYTHING!!! Including that thing i went thirds in. think its called an LX Liberty, can't remember but i think among many mods it has ...

Would love to see the old gearbox oil, got plans for the old gearbox? It would be interesting to split it open and have a look.

Cheers Cam

steptoe wrote:Ha, now that it has been declared disconnected no one could suspect either way if I was stationary or moving when this pic was taken

Yeah but being you steptoe you were probably on the freeway, camera in one hand, and a drink in the other lol

Cheers Cam

Same, offer Brat87 first though, but if there are 2

Silverbullet wrote: So it's looking really good as it is, but since the pieces I welded in are flat, I'll need to build up the area with filler to get the curve of the wheel arch back.

Or get all your guards rolled so you can fit wider tyres!

Cheers Cam

A bit confused, pictures would be greatly apprichiated!!!

Cheers Cam

Boost and efficiency do not go in the same sentence!
Just ask tweety

Instead of drilling. Go to Clark rubber and buy a sheet of it pre drilled.
Looks good in my ute, cut it to size etc. and neat holes evenly spaced.

Cheers Cam