The ***ALL NEW*** AUSubaru.com.au Forums

Today I eliminated more stuff in the way by putting it on my wagon. Last summer I pulled some door cards off a gl wagon, usually the gl's have the nicer interior. Once I had the door cards off I decided to install some mdx speakers Ive had, and the donor interior was set up for rear speakers. Then I...

Thats a drag, if the opposite of ours it would make the turbo trans mod alot easier.
cheers,MARK

d_generate wrote:Our pedal boxes seem different to what you have, here the clutch is a separate item and the brake acc are one piece, that goes for Legacy & WRX.

I wonder if a rhd wrx pedal box would cure the firewall issues. Its an easy mod, the wrx pedal box fits perfectly on the L series brake booster mounts, but I have a little bracing to do as it doesnt match the mounts under the steering column. And the pedals? cold feet:) An interesting solution to an...

Finally were getting some decent weather here, so today I installed a WRX pedal box in my L series wagon. Long story short my wagon was a 4eat and I installed an RX pedal box for an ej na trans to back an ej20g I purchased. Some time later I decided I wanted a turbo trans behind the "G" so I bought ...

Cool mod

Looks like a mock up install to me . What did you end up with between crank pulley and core support? Im also curious about what radiator your going with. I picked up a new rad for gen 1 leg/lib turbo cars.
Looks great so far !!

Good guess guys, but im pretty sure I paid extra for the " + "
cheers, Mark

I would check these guys out, pics, info and manufacturer's are listed as well....and I just received a cap, rotor, wire set and bosch plugs for my xt6, 45.00 usd delivered ( just over 12.00 shipping included) you should anticipate about 40 to 50 usd postage from the states if they use the flat rate...

Looks good:)
Well done step by step picture guide

check out this site as you can download ea81 fsm's. Its an aviation site but includes electrical and such. http://www.ch601.org/engines.htm EA81T ECU Pinout Diagram REWARD OFFER! :P I will buy a six pack to some that has the pin outs as i need to fault find Claudia (MY Wagon) I really want her back ...

Hey Jonno, checked out an xt fsm I have and here is what is listed for the full time s/r trans with diff lock. back up switch RY neut switch Lg & B diff lock pilot RY hope this helps, Mark my info shows the diff lock switch on opposite sides from the other switches, same with the d/r awd with diff l...

Do you guys have anyone handling the Empi line? A couple months ago I had to replace the front axles in the xt6. New axle assy's were about 53.00 and shipped to a local parts store overnight out of California at no charge.

http://www.empius.com/

Id be leary of grade 8 bolts. As I understand a grade 8 bolt has a very high tensile strength but a grade 5 bolt has a very high shear strength.

That was an interesting read Jonno, I just picked up the parts I need to convert my wagon to a 4 headlight setup figuring I could get much better headlamp bulbs, and I was prejudiced towards Hella Halogens. Looks like I have a bit of research to do now. Im also considering their relay placement too.

It worked out well ...I received the package the next day and installed the motor, about 86.00 total including overnight shipping vs high 120.00's and state sales tax. The best part is I can get myself home at the end of the work week, its a long drive in the dark and we get plenty of rain.

Lost the wiper motor on my xt6 last eve on my drive to work,so im out of town, about 150 miles from home and no xt's or xt6's in the wreckers within 100 miles. Ive ordered a replacment on line from rockauto.com ups overnight having it shipped to where I stay. Total with freight is still 50 bucks les...

Hey Giles, Ive found an ebay seller that caters to our 4x140 bolt pattern if your considering adaptors.
Cheers, Mark

http://shop.adapterkings.com/Car-Truck-Adapters_c2.htm

I buy a fair amount of parts on line. Its convenient and usually at a good cost savings. Ive sourced parts from 3 continents for my wagon project, and also shipped to a few continents...unfortunatly one continent too many

RSR 555 wrote:Thanks Mark It does need a grey gear knob with the 4WD switch in it

okie, ill have a look see