The ***ALL NEW*** AUSubaru.com.au Forums

better not wickipedia mt meharry then, cause its the highest in wa at 1245m. is close to you tho and you wiil get up there in a suby. better do the 2nd highest in wa as well, mt bruce (1230m) you can walk it while you there, i can reccomend this walk with a 3m rock climb section in the middle. aweso...

http://shop.ebay.com.au/?_from=R40&_trksid=p4031.m570.l1313&_nkw=holley+tuning&_sacat=See-All-Categories or google holley air bleed tuning. this book is awesome and somewhere in my collection (dont ask where, as its not in the book shelves) http://cgi.ebay.com.au/Super-Tuning-Modifying-Holley-Carbu...

no matter what you use toongs, you need to tune them to get them to run sweet. air bleeds dont have screws, thats the idle mixtures. air bleeds are on the top face of the carb inside the air cleaner, they are small holes around 1mm. your idle mix screws need to be at 1 1/4 to 1 1/2 turns out, if the...

my mate had a smaller amp in his car, but he had an oscilloscope in his shed which he connected to the speaker leads, this would show some clipping on big bass thumps. a 1farad cap fixed probably 90% of the clipping. couldnt really hear any difference by ear and the old car had heaps of rattles as w...

i got a wrx column in my brumby to match the wiring loom, untested yet tho, and i think there are factory immobiliser issues at around my00 wrx

tipping fuel down the carb when cold didnt help?

toongs, i dont have a wide band, and i dont have any number drills anymore (a nameless person borrowed them) and it takes too long for me to do it. with 1 week off every month i still trying to put gbox back in wrx, then do my brumby. sorry dude

no handbrake for now then?
i used customised tapered reamer to enlarge hole on lseries arms, but need too be aware that you dont enlarge the straight ball joint bolt locating section, just the tapered part.

i reckon when you buy new battery you get the biggest and highest cca one that will physically fit. also the import ones (my 94wrx) seem to have the normal big battery post terminals and the aussie ones have little posts (my 00wrx, gen2 o/back). i got leads changed to big posts as the batteries are ...

there are plenty of tuning books available for holleys even from public libary. i reckon you will need to change air bleeds on mains and idle. they are pretty simple to play with, the hardest bit is working out if they are rich or lean and what part of the fuel circuit is in control and will have th...

i think the studs will be loaded in this instance as the centre locating ring will be the wrong size?

i think gearbox and rear diff use a 5l bottle, and 5l will do engine and filter oil change. 600ml brake fluid will be enough to flush brake fluid. dunno how much water they have in them.
i got wrx and thats what it uses, yours wont be a lot different

+1 for the chiro. my dad is masseur at chiro down south. i swear by the chiros, i had pulled back and perth chiro got me full back xrays and had me cracking back flips within 6 days. workers comp even paid for it.

i got one for my wrx, wasnt from gripforce tho, is a lightened flywheel, 4 puck bronze plate, and heavy duty pressure plate. not long after install it slips in 3rd when the boost hits the 20psi mark. it is also unpredictable in the friction point and sometimes has 2 friction points?
it is coming out

i reckon they try to sell the expensive ones cause they last longer and they are a bugger to change (dohc are).

doesnt need to be accurate, just needs to be consistent. dynos are variable between each other anyway. as long as you know if after some mods you have more or less power than you had before. rollers are just pipe, maybe 10 or 12 inch, cap them and put your drive on one end. you can use a power/speed...

i got dohc 2.5 top overhaul kit and no issues, there is 2 different rocker covers for them, i got a kit that showed 2 different types of gaskets (4 in total). the spare ones fitted my wrx too. all fitted fine and seems ok. they have huge market there to keep costs down. you could but genuine head ga...

hey rsr, regards the stainless trim around windscreen, when do they fit it? do they fit the trim to the seal then seal to the windscreen or the other way around?
regards the stainless trim on the tailgate, is it a cut down piece from the side?

ebay usa. cheap full gasket kits. take few days to get here tho. you can get full kit from there cheaper than head gaskets alone here

my NA gen 2 outback got a second hand 99wrx 3" pipe. needed couple of additions for longer wheelbase. Was 100 bucks to modify