The ***ALL NEW*** AUSubaru.com.au Forums

Sorry i mean the clutch arm return spring that goes from the arm to the engine so the fork will return to position .

Hey gang
Im chasing a clutch spring for a 1996 imprezza.
Cheers Pete

Do ya hate it when your son turns to you and says hey Dad can you look at the clutch. Clutch, what clutch. It was beyond f*cked. then there was the three blown CV boots, the water leak. As i watch Paul's plane fly overhead, i could hear homer Simpsons classic " DoH" as i knew that option went north....

I bet he felt ROO-TED after that lol

Sorry Paul i better not show up, im recovering from the flu thats doing the rounds . I got sent home from work cause im contagious lol. My boss told me to stop cheering. lol when i got told to go home. Apparently "WOOHOO im out of here" isnt PC.
Cheers Pete

Its all good, eventually ,once they dig into the pile they will find Harold Holt.
seriously theres a few of us that are willing the help you move.
Cheers Pete

Check out a piece of subi history http://www.trademe.co.nz/motors/used-ca ... 634699.htm

I still have a full set from the 390ies i had.

Thanks Mike for the parts today.
You are a very generous Man.
Cheers Pete

I ran a 1982 ea 81 for years on unleaded and premium unleaded. i ran a cold thermostat and set the timing up different. On premium i got 650 km out of 55 litres and on standard i got 500 km. I didnt run additives at all. The motor never missed a beat.

I have had excelent results with cargo seal up, yes the same stuff ALex had trouble with.
I dont drain it out after the 30 mins.it dosent effect the radiator or the water galleries.
Cheers Pete

Hi
This company sells it as a replacement for camaros etc they do fit
http://www.jcwhitney.com/quarter-window ... 08656.jcwx

Cheers Pete

I have done this myself numerous times, it workes well. I made a core cleaning rod out or the wrap around stay that holds the radiator in place in the middle. I ground it down to fit. the stay will reach the full width of the core. I modified a pair of small wire crimpers by reshaping one blade as a...

The guy was a P plater. and the victim was taken away in a Ambo.
The act is classed as attempted murder and also leaving the scene of a crime, and failing to render assistance at a accident, the list goes on. He going to jail regardless.

My son watched a hit and run today. The owner of a L series wagon ran over a man in the car park of a shopping center, he had parked in a disabled bay. This stopped a disabled couple from using it. He was asked to move so he told them to ...off then drove out of the car park then charged back and ra...

Go on Jules drive the Jet car straight head and show them the "James bond gear you had installed.
Cheers Pete

welcome back Mike.
Glad your wife and the little tax deduction are doing well.
Cheers Pete

Thanks guys xxxx
I can stand 15 feet from the car and hear the pump working over the engine noise lol.
Thanks Paul, the motor is a vast improvement on the old one.
It pings at the upper end of the rev range
but it could be the pump pressure dropping out at the upper end causing the ping.
Cheers Pete

Hi Gang.
The fuel pump in my vortex is crappy.
Is the turbo vl commodore pump a replacement or what else is used?.
Cheers Pete

I went to the parts place and while im still trying to get a match i used a 25 amp fuse and a fuse bridge so i could run the car. the fuse blew as soon as i started it but the car still runs untill you turn it off , then you replace it to restart lol.