The ***ALL NEW*** AUSubaru.com.au Forums

Spotted AndrewT at Balcatta tip today - that trailer needs a lift kit now

Dane.

Not sure if this applies to MYs, but I recently found that it's dead easy to remove the metal frame from the seat cushion in an L Series, and it fits straight into the cushion of a Liberty seat. Original frame -> original seat rails -> seat goes in original position, without having to fabricate moun...

Looks bloody impressive Andrew. But what's that bar hanging down under the front number plate? can we set a date for a light 4x4 trial run? I could be up for a bit of that. My car isn't regoed yet, but I can always get a permit to drive it "to and from a place of repair" which happens to be in the b...

Bugger - another reason I should have found a manual parts car. I was going to offer you a brake pedal instead, but it's a fair bit different.

Dane.

bump. still available: - doors (i need all the lock barrels though) - side glass - most of the side rub strips - headlights, tail lights - most of the dashboard, including auto instrument cluster - decent front seats - standard cat-back exhaust in good order Andrew, Subafury and BlackMale, you have ...

AndrewT wrote:If it's got air-con I'd like to come and remove all the bits and pieces for it. Let me know if it does.

It has aftermarket air con. Will that do you?

BlackMale wrote:Dane i would like Section out of the tunnel of a 4WD L series, specifically the section the center bearing bolts to let me know.

Cheers

Should be ok. I'll let you know when I get the interior out (probably a week or so).

Dane.

Yep, same colour as yours. The bonnet has lots of honky nut dents from years parked under a tree. The driver's side mudguard is very straight and looks like it's been (home) resprayed fairly recently. Passenger side mudguard is mine.

Give me a call/PM if you want to have a look.

Dane.

A mate and I have just bought an L to strip for parts. It's a 1991 carby auto, with a broken transmission, in metallic light blue. If you need anything, let me know. Available: most body panels (rust in A pillars, but all the removable panels look good), most lights, lots of interior bits, glass (wi...

SSS Auto Parts make fullysik replacement tail lights for lots of cars, dunno about Libs though. Available through most car parts shops.

And remember, Google is your friend. There must be some around.

Dane.

Kappage wrote:Also while it is up there i will take off the things that could hold some value to others. Anything else other than the mirrors?

Would you consider exchanging the LHF mudguard for my slightly damaged one + cash?

And maybe those roof racks too, depending on how much you want for them.

Dane.

I could use a left-hand front mudguard if you've got one lying around.

Dane.

Anyone got a pic of the factory mounting arrangement? Mine is currently very noisy.

Dane.

I know Joondalup council tows dumped vehicles to their depot, then auctions them once or twice a year. Other councils are probably similar. The red leone was at a St Ives ERT training yard in Kambalda. All I managed to scavenge was a front blinker lens, before everyone got stuck in with the hooligan...

Derroes like these?

Been waiting for an opportunity to post that.

Was the one in Rockingham anything special or just a stocko Leone?

Dane.

The sparky who fixed/finished my EJ18 conversion wiring ran an ignition positive to the middle pin of the coil pack connector. In that wire he put a 10A fuse. At that stage the fuel system was unfinished, so the car would only run for a few seconds at a time, but it seemed electrically ok. Now with ...

PM sent

(10 characters)

Well if you're all gonna do that, I better even things out:




Dane.

Looking good Dave.

If you need any exhaust bits, I've got a cat-back 2" exhaust for a 2wd Impreza sitting here that you can have. It's heading for the scrap bin otherwise.

Dane.

EJ18:
420mm from the back of the adapter plate to front of the crank pulley
710mm rocker cover to rocker cover