Search found 5335 matches

by TOONGA
Mon Jul 13, 2009 10:55 pm
Forum: Western Australia
Topic: FS: EJ22 Engine (blown HG)
Replies: 11
Views: 3456

has the motor gone or is it still taking up space in your shed?

TOONGA
by TOONGA
Mon Jul 13, 2009 10:22 pm
Forum: Trouble Shooting
Topic: RX rear disks the same as early MY fronts?
Replies: 55
Views: 9264

thanks I want the whole kit and caboodle out of curiosity what did Subaru want for the hubs alone ? I did see on quokka a while ago someone in manjimup had a vortex rear setup for $1000 (just the rotors hubs and calipers) I had to laugh as wreckers quote between $150 -$300 for a set I will keep look...
by TOONGA
Mon Jul 13, 2009 10:10 pm
Forum: Electrical, Wiring and Lighting
Topic: interior light in brumby not working on 'door' setting
Replies: 9
Views: 2456

kona480 wrote:the light works when you turn it on, just not on the door setting
either the switch in the light is buggered or the switches in the doors are stuffed

TOONGA
by TOONGA
Mon Jul 13, 2009 8:12 pm
Forum: Trouble Shooting
Topic: RX rear disks the same as early MY fronts?
Replies: 55
Views: 9264

I have searched high and low for the last 2 days on the internet for the existence of rear rotors and calipers for the older subarus (4 slot) as I want a set for my brumby they are like finding hens teeth and rocking horse shit combined if anyone has a reasonably priced set they want to sell pm me p...
by TOONGA
Mon Jul 13, 2009 5:32 pm
Forum: Electrical, Wiring and Lighting
Topic: interior light in brumby not working on 'door' setting
Replies: 9
Views: 2456

an amp meter and a bit of patience is whats required here which is why my brumby still has no interior light (a yellow sticker offence in WA if the cop is cranky) but as said 99% of the time its a contact problem the other 1% its a blown globe with the alarm not working it is a simple fix I was told...
by TOONGA
Sun Jul 12, 2009 9:21 pm
Forum: Subaru Chat
Topic: my new brumby website
Replies: 1
Views: 564

thats a nice looking site you have there I hope it goes well for you

TOONGA
by TOONGA
Sun Jul 12, 2009 4:49 pm
Forum: Subaru Chat
Topic: dibs mum
Replies: 7
Views: 1980

my condolences as well,my father passed away last year and I still miss him.

TOONGA
by TOONGA
Sat Jul 11, 2009 9:45 pm
Forum: Subaru Chat
Topic: Strut braces for MY series.
Replies: 12
Views: 2725

last celtic warrior wrote:Umm, hammered out of 1.2mm sheet by hand. (Tin snips, drill press, couple different hammers, and a vice)
well done Im impressed

one question after looking at my brumby today where are you going to re route all the plumbing

TOONGA
by TOONGA
Sat Jul 11, 2009 1:26 pm
Forum: Trouble Shooting
Topic: Need help 94 auto liberty engine cuts out & power light flashes
Replies: 3
Views: 1557

how many flashes is the power light giving as I understand it thats a fault code ( I might be wrong)

which should tell you what the problem is once you know the fault code
if you read this thread it could help as well

showthread.php?t=12588&highlight=fault+codes

TOONGA
by TOONGA
Fri Jul 10, 2009 10:48 am
Forum: Suspension - shocks, springs and upgrades
Topic: brumby lift kit pictures needed
Replies: 8
Views: 5937

Im looking at making my own out of aluminium block and stainless steel plate and I want to ensure I have every fiddly bit covered

TOONGA
by TOONGA
Thu Jul 09, 2009 11:15 am
Forum: Trouble Shooting
Topic: Tearing hair!
Replies: 23
Views: 5627

sounds like a badly blocked fuel line from the tank to the carby as suggested clear the line with compressed air I would do it on an empty tank as well but disconnect both ends of the fuel line and blow the line from the tank end just make sure you have a stunt friend holding a container over the fu...
by TOONGA
Thu Jul 09, 2009 10:07 am
Forum: Subaru Chat
Topic: what happens when no new Brumby....
Replies: 10
Views: 2277

Ive seen plenty of those Proton utes in Malaysia fanging around in some of the worst road conditions ever (real roads reduced to potholes and gravel by overuse) they did well and Ive often wondered what one would go like with a subaru drive train Ive even wondered if Proton stole the old brumby pres...
by TOONGA
Wed Jul 08, 2009 9:53 pm
Forum: Subaru Chat
Topic: Strut braces for MY series.
Replies: 12
Views: 2725

nice who did the pressing of the metal it looks very professional

TOONGA
by TOONGA
Wed Jul 08, 2009 2:13 pm
Forum: Suspension - shocks, springs and upgrades
Topic: brumby lift kit pictures needed
Replies: 8
Views: 5937

email sent awaiting your reply

TOONGA
by TOONGA
Tue Jul 07, 2009 9:56 am
Forum: Subaru Chat
Topic: US member needs help from Victoria resident
Replies: 12
Views: 3520

for the money it will cost you in postage find an aluminium welder in your area tell him/her what you want and hey presto he /she should be able to get it done.

or try these people they are in the US

http://alliedarmament.homestead.com/Bumper.html
by TOONGA
Sun Jul 05, 2009 3:52 pm
Forum: Western Australia
Topic: vortex anyone???
Replies: 7
Views: 2054

would be nice to check it out while Im up here in Perth I may have to wander over there

TOONGA
by TOONGA
Thu Jul 02, 2009 9:57 pm
Forum: Engine, Gearbox and Diff
Topic: Getting Nervous. Where did my oil go?
Replies: 49
Views: 9179

as said moisture in the engine and oil will give a false reading when cool from the look of those pics its the front timing seals the harmonic seal rear main and the rocker gaskets a bit of a job but fixable a long country drive will push the motor down the under body and over the exhaust and runnin...
by TOONGA
Thu Jul 02, 2009 6:46 pm
Forum: Engine, Gearbox and Diff
Topic: Getting Nervous. Where did my oil go?
Replies: 49
Views: 9179

my brumby only needs a half a litre of oil to dissapear for the dipstick not to read its really annoying

what are you driving and how many kms has it done?

and how cold has it been in your area?

TOONGA
by TOONGA
Tue Jun 30, 2009 9:51 pm
Forum: Engine, Gearbox and Diff
Topic: oil filter question
Replies: 17
Views: 6001

living in Australind which is 20 minutes from Bunbury which is 2 hours from Perth seems to mean freight is charged on gold weight (hmmm that weighs 20 grams gold is 40$ a gram hmmmm) well not that bad but a 22 dollar filter in perth costs 28 dollars in Bunbury so if I can find a comparable cheaper r...
by TOONGA
Tue Jun 30, 2009 7:48 pm
Forum: Western Australia
Topic: Gen1 gen 2 parts perth
Replies: 9
Views: 2393

Chris I will be in Perth this weekend will give you a call to come and see what you have if thats ok

TOONGA

Go to advanced search