The ***ALL NEW*** AUSubaru.com.au Forums

Hi, I am wondering if anyone has had much experience with different wheels?

Did the splines change at all after Gen 1 liberty? I.E. can you fit a circa 2000 wheel to a 1990 steering column?


thanks.

sorry - forum was playing up, this is a duplicate post, please delete.

sorry - forum was playing up, this is a duplicate post, please delete.

Not much action here, but I am a little excited to try out some braided lines, where is a good place to buy some? I would think it would be better if a supplier/manufacturer had already made them to suit an L/XT series 4 wheel disc vehicle before...

Ah huh. Wouldnt be much fuel vapor left once it traveled all the way from the pod, through the turbo, the manifold into the engine!

No one?

And...injector in a pod filter? Huh?

Yeah I'm not sure about the whole turbo thing aye, turbos don't see much boost time when driving normally, well the way I drive anyway.
I reckon most of the time the crankcase pressure would overcome the post-cartridge oil pressure.
Some thought I will take...

This is an idea I had a while ago and have been trying to work out the kinks in my head: http://www.subaruxt.com/forum/viewtopic.php?f=1&t=13275&st=0&sk=t&sd=a&hilit=Crawford#p148646 It seems the idea (or adaption of someone else's) seems solid so long as it mounted on the engine and has a check val...

Yes Gannon, you are probably correct but you wouldn't want condensation forming during cool down and returning creamy gunk to the sump. I have also found something interesting, Mann , the makers of the progeny AOS, recommend using a one way valve on the drain if draining back above oil level so that...

I suppose it depends on where the can is situated and if it is the same temp as the engine and for as long as the engine...

Okay, so here goes me opening up an old thread and potentially a big can of whoop-ass it seems; Gannon if you're still around, how did your oil seperator work out? These are quite popular now on subies especially from Crawford performance but I am wondering if you had any moisture collect inside the...

Hi, does anyone have a (or some) dizzy cap seal and the little square side breather plugs?
From an optical EA82 Distributor.



Have had some water problems!

You may find the blind holes & threads aren't in the Cylinder head bosses where the big boomerang arm bolts on...

So do you think it's a matter of braided hoses feeling better than non braided ones or just better than 25+ year old ones?
I wonder would new regular hoses feel the same as new braided ones?

Also, is there a way you can tell if your hoses are swelling under pressure?

Forget about the starter, if it turns over it, the battery, the cables, the clamps are all doing their job, The alt is only to keep the battery topped up, so forget about it too. Are you getting ignition? - at the plug? if so, are you getting ignition under compression? If you are using NGK plugs, t...

I am looking for some decent ones of these bad boys:



Does anyone have any with good seals on them?

Would also like to get some of the Air Con. Idle Up speed screw. (not pictured)

thanks.

Easy to get from rockauto.com

https://www.rockauto.com/catalog/x,carc ... ttype,1736

EA82 Rear Discs :

http://www.ebay.com.au/itm/Subaru-L-Ser ... 259abb0515

Yeah but that's just a retainer on the push lock hose, are the part numbers on the injectors different?