The ***ALL NEW*** AUSubaru.com.au Forums

And I had to press play... :rolleyes:

Here is a good place to start:

https://www.vicroads.vic.gov.au/registr ... ub-permits

Get a sunraysia rim then and fit it to the hub and you will see that a 110mm centre bore is crap loads bigger than the 93mm locating lug to lug measurement. Then come back and tell me there is no gap cause i`ve got 5 sets of these rims and not one fits on the lugs. Let me explain this another way, ...

Brumby hubs are lug centric not hub centric, so no centre bore locator is required.

That looks like the same model as I have - but this ones in much better condition though ... :) The high price would because of its original condition + low Km ... :p Add : What's the bet its name is Redback ... ? Cheers, Bantum ... Hard to tell from the photos if it actually is in good condition. ...

Close as I can get without a part catalogue is a : 'Turn Signal Return Spigot' Any futher advances ? - An actual Part No. would be great ( aka : Frog ? ) Cheers, Bantum ... I think you will find you cannot (or could not) actually buy the plastic part separately. It is the whole combo switch or noth...

Bantum I was under the impression it is not possible to buy direct from Yahoo Japan. If you are not in Japan you have to use a service like Clega or Import Monster to organise the purchase and shipping for you.

Perhaps things have changed... Good luck!

My experience suggests these rims were an optional, additional cost extra and not standard fitment. Ultimately this means there are not very many around. My set came from the US as I got sick of waiting for a set here and they are my favorite factory 13 inch wheel. If you are only after one then the...

Exactly Silverbullett! I could not have said/typed it better.

Hey Willy, I would be interested in 1 possibly 2 if you do get more made.

Anyone seen these? http://www.ebay.com.au/itm/400720303217?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 http://www.ebay.com.au/itm/400720303217?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1438.l2649 Always struck me as not one thing or the other, so not really working in my opinion but each to th...

A SAAS boss is drilled for both of the typical 6 hole steering wheels. For example you can use a Momo or a Nardi. Almost all 6 bolt steering wheels have one bolt pattern or the other.

Willy Fisterbottom wrote:So, Mr Sublime shall you be joining us at Subinats in either your wagon or DL sedan?????

Unfortunately I will not be able to make it... Brakes are shot in the DL and well, I have been too lazy to swap them over to the discs...

Reasonably clean looking 1982 Wagon

dfoyl wrote:I recall a recent auction buyer was pi$$ed at this seller for a brumby tarp - mis-represented a beat up, stretched unit as as-new.

That guy's tonneau "auction" was for a different seller than is being discussed here...

Bennie there is that red one and a green one that show up at various Oz car shows. Some photos of the sprite green one are in the thread of the Brumby I purchased some months ago... I do agree with you though, other than those two most are dead or severely rusted. My issue with the US one of this th...

Opps, edited my comment as I missed the 't' on Not... With 'No' it read just a little bit sarcastically. It was not meant to be.

and this one : http://i78.photobucket.com/albums/j87/henpecked/IMG_20140521_164245_728.jpg I'm not sure what it is yet ... ( think it could either be a Jackman or an early wagon wheel copy ) Can any one help ? Cheers, Bantum ... That last one looks like a Peco Star rim. I know they did make rims fo...

Not really Wooster, it is over 25 years old so if it was imported you could drive it!

But actually driving it when it's stone cold it's nothing but flat spots and no throttle response until it warms up. The old Hitachi was not much better. Maybe if I put the exhaust manifold intake/air pre-heat hose thingy back on with the stock air filter it would be different? Interesting because ...